Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 2 subscribers
  • Views 1630 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG220 Rev 1 - WebAdmin Issues

270797lb
Hi Astaro Peeps,

I have a ASG220 Rev 1 which I have acquired somehow, it had no hard drive so I brought a cheap 80GB IDE 2.5" from amazon, downloaded the 8.311 ISO from the Astaro FTP site, installed OK.

Once the unit booted i noticed on the LCD it came up with Busy 100% and WebAdmin first config went slower than normal but still completed successfully.

When I came to log in for the first time after all post-install config was completed, I entered the user and password but the timeout pop came up 5 times and it still tried to log in. 

I then restarted the unit and came to log in and it is still very slow and timing out.

Any Ideas?

Thanks in advanced


This thread was automatically locked due to age.
Parents
  • 0
    Hi, 270797lb, and welcome to the User BB!

    I would think that you could use a 512MB unit for firewalling, routing and logging only, no IPS, no Web Filtering, no Reporting, nothing else.  If you can find an old copy of V6, you probably could use more capabilities.

    Cheers - Bob
Reply
  • 0
    Hi, 270797lb, and welcome to the User BB!

    I would think that you could use a 512MB unit for firewalling, routing and logging only, no IPS, no Web Filtering, no Reporting, nothing else.  If you can find an old copy of V6, you probably could use more capabilities.

    Cheers - Bob
Children
No Data