This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Build my own small Astaro

Hi,

Do you have some experience on how to build a fan less small UTM for my home.
Can you help me to find the right equipment ?

I want buy or build something that can do this :

 - Work FAN less.
 - 3 NIC.
 - One wireless access (it seems that UTM don't support PCI WiFi card).
 - Work without keyboard and screen.
 - Integrated ADSL modem (PCI or other).

Can you help me ?

    Thanks,


This thread was automatically locked due to age.
Parents
  • Hi, for 16mbps, an Atom CPU-based system would be ok.

    I may have some multi-port systems bookmarked, I will check later.
    Meanwhile, look on Logic Supply, they usually have a couple Jetway systems with 1 NIC + 3 NICs optional.

    Also, you could try to get a Sophos UTM 120 appliance (and convert it to a home license)... Look on CDW or eBay.
    Iirc, they are fanless. 
    Be sure to get a current model, and note they cannot take over 2gb RAM (which some users find too little).

    If it's not too big, there's a few quiet mini-ITX cases available with room for a PCIe NIC.
    One example wild be the Fractal Design Node 304.

    Quad-port NICs are available for a few hundred USD, but I think I've seen some recently for closer to $100.

    You could get an Atom board, or something such as one of the Gigabyte h87 or z87 based mini-itx boards, with a low-watt Haswell CPU.
    Optionally, you could replace the Intel heatsink with a larger fan less one, and just use the Node 304's rear case fan on low speed.

    Barry
Reply
  • Hi, for 16mbps, an Atom CPU-based system would be ok.

    I may have some multi-port systems bookmarked, I will check later.
    Meanwhile, look on Logic Supply, they usually have a couple Jetway systems with 1 NIC + 3 NICs optional.

    Also, you could try to get a Sophos UTM 120 appliance (and convert it to a home license)... Look on CDW or eBay.
    Iirc, they are fanless. 
    Be sure to get a current model, and note they cannot take over 2gb RAM (which some users find too little).

    If it's not too big, there's a few quiet mini-ITX cases available with room for a PCIe NIC.
    One example wild be the Fractal Design Node 304.

    Quad-port NICs are available for a few hundred USD, but I think I've seen some recently for closer to $100.

    You could get an Atom board, or something such as one of the Gigabyte h87 or z87 based mini-itx boards, with a low-watt Haswell CPU.
    Optionally, you could replace the Intel heatsink with a larger fan less one, and just use the Node 304's rear case fan on low speed.

    Barry
Children