This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Home Hardware, Best Bang per Dollar.

Hello again Astaro Community!

It's been awhile since I was active on the forums but I'm back with more questions for the experts. I'm trying to make the most powerful build with the least amount of space and cost requirements. The quieter the better. I don't build rigs for a living but I believe these are complete and functional, if you see any incompatibilities or gaping holes please point them out!

I have 3 "rigs" below, 2 I have thought about building and a pre-built bare-bones listed below and would appreciate any opinions you have to offer.

1. Preferred

Motherboard: GA-B75N $79.95
BIOS version: 2 x 64 Mbit flash, Use of licensed AMI EFI BIOS, Support for DualBIOS™, PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
CPU:  Intel Celeron G540 2.5GHz Dual Core Sandy Bridge 65W 1155 Socket $49.95
RAM: Kingston Hyper X G.SKILL Ripjaws Series 4GB (2 x 2GB) $44.95
Network Interfaces: 2 x Realtek GbE LAN chips (10/100/1000 Mbit)
Hard Disk: SATA 2.5' 120GB $39
Case/Chassis: M350 by Mini-Box.com $39
Power Supply: picoPSU-150-XT + 102W Adapter Power Kit from Mini-box.com $59
Total Power Consumption Unpurchased/Unknown. Processor is 65W Rated
Total Cost: Estimated $320 ($311.85) USD before shipping/tax or any changes. Most if not all parts are currently offering free shipping.

Comments / Notes: This system can easily be beefed up for not much more cash if you want the newer Ivy-bridge processors or a core i3,i5,i7. Also its small and supposed to be really quiet if not soundless and according to the specs can be ran fanless which would cut down on both noise, power and moving parts. Also I don't believe this motherboard shipps with a SATA cable for the HDD which would need to be purchased as well as some other possible misc cords and screws.

I'm sure I could go cheaper on the RAM. Any thoughts?



2. OEM Production 2550L2D-MxPC Black Mini / Booksize Barebone System - Newegg.com (I used Google URL Shortner to post this link to Newegg, if you would prefer to just search it yourself here is the model#)

2550L2D-MxPC

I have read several reviews on the Atom based processor's and everything I have read make me feel like the celeron's are superior. If thats NOT the case, or if it doesn't matter in THIS case then this system costs approx.  $217.95 USD before any other costs like shipping or tax are considered (all offer free shipping currently) and would be the best buy I think.

Kingston Hyper X 2x 2GB sticks KHX16S9K2 ($24.95 for BOTH)



3. Cheapest I think that could possibly work.
Motherboard: GA-C1007UN-D $89
BIOS version: 2 x 32 Mbit flash, Use of licensed AMI EFI BIOS, Support for DualBIOS™, PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
CPU: Intel Celeron 1007U 1.5Ghz Dual Core
RAM: Kingston Hyper X G.SKILL Ripjaws Series 4GB (2 x 2GB) $44.95
Network Interfaces: 2 x Realtek GbE LAN chips (10/100/1000 Mbit)
Hard Disk: SATA 2.5' 120GB $39
Case/Chassis: M350 by Mini-Box.com $39
Power Supply: picoPSU-150-XT + 102W Adapter Power Kit from Mini-box.com $59
Total Power Consumption (in Watts, if known): Unpurchased/Unknown. Processor is 65W Rated
Total Cost: Estimated $270.95 most parts are free shipping. 
Comments / Notes: Taking a 1GHz processing hit to save 50 bucks seems a bit steep.


Also because its relevant, this is just for basic home use, multiple devices connecting via wireless to a router behind Sophos with much video streaming and gaming. Current connection is max at 6Mbps (small town) but most likely will never see more than 50Mbps of throughput. I would like/need to utilize most of Sophos features. IPS, Antivirus (maybe), web filtering, application control, firewall rules, possible QoS, ect. 

I look forward to your thoughts and opinions!

Best Regards,

Bergie


Edit Notes.

I did this all very late one night and made some mistakes.

Edit 1 - Celeron 1007U is a Dual Core not a Single Core.
Edit 2 - Motherboard for Rig's 1 & 3 requires Desktop Memory not Laptop Memory.
Edit 3 - Rig 2 did not have Ram quoted in the estimated cost.


This thread was automatically locked due to age.
Parents
  • Hi,

    a. Realtek NICs aren't very good, but you're stuck with them unless you want to spend more (e.g. Intel S1200KPR (still a few in stock on Amazon), MSI Z87I, Jetway NF9J-Q87, or add-in another single or dual NIC).
    Realteks are probably 'good enough' for under 50mbps.

    edit: the MSI board does NOT have Intel NICs.


    b. #2 has Broadcom NICs but the (older) Atom CPU is too slow to handle much traffic with IPS, etc. My (single core) Atom can now only do 15mbps through the IPS on Speedtest.net, and I'm not even using A/V, proxies, etc.

    dual-core Celerons are much faster.
    If you only have 6mbps though, an Atom might be a reasonable choice until you get more bandwidth, but I wouldn't get a no-name board/system.

    Also, new Avoton Atoms just came out which are significantly faster than this Atom.

    c. socket 1155 is one generation old; current (Haswell) CPUs use socket 1150; they will use less electricity and be slightly faster, but you might have to pay more for the board (e.g. Jetway NF9J-Q87).
    Also, another user just got a Haswell board and is getting RTC errors.

    d. you cannot run a 65W CPU fanless! 
    My Atom system is fanless, but it only draws 17W for the whole system, and the top of the case where the PicoPSU is still gets very warm.

    e. don't buy anything without first finding out which NIC Chips (e.g. Realtek RTL8111E or Intel i217v) are onboard, and verifying that they work in the UTM (search these forums; post a question if you don't find a match).

    Barry
Reply
  • Hi,

    a. Realtek NICs aren't very good, but you're stuck with them unless you want to spend more (e.g. Intel S1200KPR (still a few in stock on Amazon), MSI Z87I, Jetway NF9J-Q87, or add-in another single or dual NIC).
    Realteks are probably 'good enough' for under 50mbps.

    edit: the MSI board does NOT have Intel NICs.


    b. #2 has Broadcom NICs but the (older) Atom CPU is too slow to handle much traffic with IPS, etc. My (single core) Atom can now only do 15mbps through the IPS on Speedtest.net, and I'm not even using A/V, proxies, etc.

    dual-core Celerons are much faster.
    If you only have 6mbps though, an Atom might be a reasonable choice until you get more bandwidth, but I wouldn't get a no-name board/system.

    Also, new Avoton Atoms just came out which are significantly faster than this Atom.

    c. socket 1155 is one generation old; current (Haswell) CPUs use socket 1150; they will use less electricity and be slightly faster, but you might have to pay more for the board (e.g. Jetway NF9J-Q87).
    Also, another user just got a Haswell board and is getting RTC errors.

    d. you cannot run a 65W CPU fanless! 
    My Atom system is fanless, but it only draws 17W for the whole system, and the top of the case where the PicoPSU is still gets very warm.

    e. don't buy anything without first finding out which NIC Chips (e.g. Realtek RTL8111E or Intel i217v) are onboard, and verifying that they work in the UTM (search these forums; post a question if you don't find a match).

    Barry
Children
No Data