Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SW-Appliance: Installation hangs at 16%

Hi Folks,

I am a big huge astaro-fan ... and I would now like to move to the UTM9.
But no matter what version I try - the installation hangs at 16% (hw-detection -> storage device detection).

Downloaded from: ftp://ftp.astaro.com/pub/UTM/v9/software_appliance/iso/asg-9.100-16.1.iso and double-checked the md5-sum.

User HW:
Asus Eee Box B202 (Intel Atom N270 1,6GHz, 1GB RAM, 160GB HDD, Intel G945GSE)

Any hint on this? [:S]

PS: (ALT-F4) ErrMsg: part_get_disk: ped_device_get: failed


This thread was automatically locked due to age.
Parents
  • Hi ,

    New ver won't install with 1Gb of mem.
    If I read good your post you are using a device with 1 Gb Mem .
    That won't work , at least 2Gb Mem is required .

    All my best
  • Hi ,

    New ver won't install with 1Gb of mem.
    If I read good your post you are using a device with 1 Gb Mem .
    That won't work , at least 2Gb Mem is required .

    All my best


    thanks gilipeled.
    I also try'd with the following hw (Intel Atom N270 1,6GHz, 2GB RAM, 160GB HDD, Intel G945GSE) ...unfortunately with the same result. according to "Help" (F1) in the install manager is the minimum requirement is 1GB.
Reply
  • Hi ,

    New ver won't install with 1Gb of mem.
    If I read good your post you are using a device with 1 Gb Mem .
    That won't work , at least 2Gb Mem is required .

    All my best


    thanks gilipeled.
    I also try'd with the following hw (Intel Atom N270 1,6GHz, 2GB RAM, 160GB HDD, Intel G945GSE) ...unfortunately with the same result. according to "Help" (F1) in the install manager is the minimum requirement is 1GB.
Children