Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

USB to Ethernet Adapter

Anyone using or tested any USB to Ethernet adapters on a UTM system? 

New Mac Mini's onboard NIC isn't detected by the install (only thunderbolt one is). Thought the USB adapter might be a 'get out of jail for free' card.

[:)]


This thread was automatically locked due to age.
Parents
  • Will do but for the moment I believe its a Broadcom bcm57765. 

    Thanks
  • I use an USB NIC Adapter as external interface on a utm. The provider requires a pptp connection on that interface.
    Since I changed from a ESX Version (fix nic) to the usb nic version without ESX the performance on that interface is less than 1 Mbit/s? 

    SW Version is 9.100-8 on an Atom System with 2GB Mem.

    Do you mean that with less performance on a usb nic or is there an other problem?
Reply
  • I use an USB NIC Adapter as external interface on a utm. The provider requires a pptp connection on that interface.
    Since I changed from a ESX Version (fix nic) to the usb nic version without ESX the performance on that interface is less than 1 Mbit/s? 

    SW Version is 9.100-8 on an Atom System with 2GB Mem.

    Do you mean that with less performance on a usb nic or is there an other problem?
Children
  • I use an USB NIC Adapter as external interface on a utm. The provider requires a pptp connection on that interface.
    Since I changed from a ESX Version (fix nic) to the usb nic version without ESX the performance on that interface is less than 1 Mbit/s? 

    Do you mean that with less performance on a usb nic or is there an other problem?


    Yes, USB NICs are known for very poor performance.

    However, 1mbps seems especially bad.

    Barry
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?