Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 24 replies
  • Subscribers 2 subscribers
  • Views 17304 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG220 RAM Upgrade successfully

marcohh
Hello,
I realize that there are a lot of Threads regarding a RAM upgrade, but i never found a helpful Answer how to do a 100% working upgrade. So maybe this helps:

We have an ASG220 rev2 with 1GB RAM factory installed.
I upgrade this Device to 9.004-34.
After this, i change the original RAM Module to a 2GB Kingston KTH9600BS/2G Module.
After reboot the ASG shows 2GB RAM in Web GUI, RAM Usage decrease from 85% to 60%.
Easy Job, no BIOS update or other "hacks" necessary. Unit is working fine since a week.

Cheers
Marco


This thread was automatically locked due to age.
Parents
  • 0
    I used 4GB in each of our 2 ASG220 rev4 since the first day.
    The support has never had a problem with that.

    The only thing......i had to remove one of the two 2GB Modules if i want to install a new Image from the Installer-CD (SSI) - but that isn't a great problem.

    It would be nicer if there where a way to edit the specs which are used from the installer to detect the used Hardware-Appliance.

    The Modules i used in our two ASG220 rev4 are Kingston KVR10066D3S8N7/2G

    greetings
Reply
  • 0
    I used 4GB in each of our 2 ASG220 rev4 since the first day.
    The support has never had a problem with that.

    The only thing......i had to remove one of the two 2GB Modules if i want to install a new Image from the Installer-CD (SSI) - but that isn't a great problem.

    It would be nicer if there where a way to edit the specs which are used from the installer to detect the used Hardware-Appliance.

    The Modules i used in our two ASG220 rev4 are Kingston KVR10066D3S8N7/2G

    greetings
Children
No Data