This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM Hardware?

Hello everybody

does anybody know, which for hardware the new utm100/110 appliances are? Or can somebody say, what hardware is needed to get a firewall thoughput which is higher than 150MBit/s?

Thanks
Kilrathy


This thread was automatically locked due to age.
Parents
  • Hi, my dual-core Atom n270 can only do about 45mbps with only IPS and Application Detection enabled (and PacketFilter, which uses little CPU).

    I would NOT recommend any Atom for your use.

    A Ivy Bridge i3 should be fine, but if you are going to be using a lot of features, such as dual-scan A/V for http and/or email, and have a lot of simultaneous users, you might want to get a Quad-Core Ivy Bridge i5 for higher performance and future-proofing.

    Also, get at least 4GB of RAM, preferably 8GB if you are going to be using the http features.

    Barry
Reply
  • Hi, my dual-core Atom n270 can only do about 45mbps with only IPS and Application Detection enabled (and PacketFilter, which uses little CPU).

    I would NOT recommend any Atom for your use.

    A Ivy Bridge i3 should be fine, but if you are going to be using a lot of features, such as dual-scan A/V for http and/or email, and have a lot of simultaneous users, you might want to get a Quad-Core Ivy Bridge i5 for higher performance and future-proofing.

    Also, get at least 4GB of RAM, preferably 8GB if you are going to be using the http features.

    Barry
Children
  • Also, when choosing a processor for your build, get more MHz if you can work it into the budget. On some of the processes running within the UTM, A/V for example, more cores means more simultaneous scan's but more MHz means each scan is faster.

    With only two users, more cores won't be as beneficial as more MHz.