This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Far too many IP's showing up as under scope of license

Hi,
I'm using the Astaro home gateway license for my two homes, and even between them there is definitely less than 40 devices on the network, surely, with 4 people at one house and 2 at the other. Somehow I have 47 active IP's in the network, and alot of Unknown leases in the lease table. It's not people on my wifi, as the controller software for that shows only 5 users. At the main site I only even have a 24 port switch and the remote one an 8 port one. The controller spans both sites so on wireless at both sites there are total 5 users. I really don't get what's going on.

Thanks,
Mark


This thread was automatically locked due to age.
Parents
  • Hi,
    I'm using the Astaro home gateway license for my two homes, and even between them there is definitely less than 40 devices on the network, surely, with 4 people at one house and 2 at the other. Somehow I have 47 active IP's in the network, and alot of Unknown leases in the lease table. It's not people on my wifi, as the controller software for that shows only 5 users. At the main site I only even have a 24 port switch and the remote one an 8 port one. The controller spans both sites so on wireless at both sites there are total 5 users. I really don't get what's going on.

    Thanks,
    Mark


    Make sure the entire dhcp pool for both locations is at least one less than your home license allotment.  Any static ad dies outside of your dhcp range that are present will be detected and counted

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Reply
  • Hi,
    I'm using the Astaro home gateway license for my two homes, and even between them there is definitely less than 40 devices on the network, surely, with 4 people at one house and 2 at the other. Somehow I have 47 active IP's in the network, and alot of Unknown leases in the lease table. It's not people on my wifi, as the controller software for that shows only 5 users. At the main site I only even have a 24 port switch and the remote one an 8 port one. The controller spans both sites so on wireless at both sites there are total 5 users. I really don't get what's going on.

    Thanks,
    Mark


    Make sure the entire dhcp pool for both locations is at least one less than your home license allotment.  Any static ad dies outside of your dhcp range that are present will be detected and counted

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Children
  • Hi, Mark, and welcome to the User BB!

    The Astaro retains an address for 7 days.  You can check the 'Active IP Addresses' tab in 'Licensing'.

    Cheers - Bob


    Make sure the entire dhcp pool for both locations is at least one less than your home license allotment.  Any static ad dies outside of your dhcp range that are present will be detected and counted


    Thanks, I think I figured out what's going on then, since the computers are used across both sites/subnets there become duplicates of them since the last site is retained for 7 days, and we actually have close to 40(!?) devices (switches/aps/tvs/stbs included) on the network, about 10 of which that go between the houses, so pretty close to the limit anyways. 
    I just changed my license to the essentials for business one, as that's actually all I use, however I did notice a peculiarity, I now have 10 endpoint licenses (only had 2 on home license), and LiveConnect actually seems to work.

    On a side note, I am absolutely loving Astaro, coming from pfSense I tried almost everything and settled on Vyatta until I discovered that there was still a free version of Astaro.