This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Loosing network connectivity under Hyper-V

I've got ASG 8.303 running as a guest in a Windows 2008 R2 Hyper-V server.

After a day or so the VM will loose network connectivity on the LAN side only, the WAN (Cable Modem) is up and functioning normally. Rebooting the VM fixes the issue temporarily.

I've tried switching network adapters for the LAN side as well as disabling all the Offloading on the NIC's with no success.

I've never seen anything like this before, anyone have any ideas on where to begin troubleshooting?


This thread was automatically locked due to age.
Parents
  • Hi,

    I think this seems heavily related to this issue:
    https://community.sophos.com/products/unified-threat-management/astaroorg/f/52/t/28415

    I never tested it only the LAN and DMZ lost connection and that the WAN is still active, so how did u figure that out?

    Next, are you able to log in via console on the Astaro? And did u checked the Logfiles for anything?

    I think its the same problem, my Astaro stayed up for 8 days the last time and then suddenly lost connection and wasn't able to webadmin etc, bit console still worked.

    This issue shuld be investigated, since Hyper-V is official supported and more and more user experince this issue, also in VMWare...
Reply
  • Hi,

    I think this seems heavily related to this issue:
    https://community.sophos.com/products/unified-threat-management/astaroorg/f/52/t/28415

    I never tested it only the LAN and DMZ lost connection and that the WAN is still active, so how did u figure that out?

    Next, are you able to log in via console on the Astaro? And did u checked the Logfiles for anything?

    I think its the same problem, my Astaro stayed up for 8 days the last time and then suddenly lost connection and wasn't able to webadmin etc, bit console still worked.

    This issue shuld be investigated, since Hyper-V is official supported and more and more user experince this issue, also in VMWare...
Children
  • I never tested it only the LAN and DMZ lost connection and that the WAN is still active, so how did u figure that out?


    I know this to be the case because I can reach the firewall from another network. I can VPN in and the dashboard shows both Ethernet adapters as up and green. Pings from the firewall to any internal IP address fail.

    From the computers on LAN side I cannot ping the Firewall IP. So as best I can tell the Virtual Ethernet Adapter servicing the LAN side is failing.

    And did u checked the Logfiles for anything?

    I am not sure which log file to be looking at, I am not that familiar with Unix/Linux. Which ones should I be looking at?

    I last rebooted it yesterday afternoon, when it goes down again I'll grab the log files and check thru them.