Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 2 subscribers
  • Views 641 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Manual up load of Up2Dtae file Fails

Junior_996
I am on 8.001 ( after a rebuild ) and have tryed to manualy up load 8.002 and it keeps on failing with the error "BAD REQUEST" 

when I reloaded the system I tryed to restore my backup from last month and get the same error, the version that I had loaded was 8.203 when I did the backup.

so there is 2 questions

1/ why the error from the manual up2date

2/ can you reload a config from a later version is 8.203 to 8.001

thanks in advance


This thread was automatically locked due to age.
Parents
  • 0
    OK, so your firmware is at 8.203?  You put an unencrypted backup in the root directory of a USB memory stick, insert it in the Astaro, reboot, and what happens?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    OK, so your firmware is at 8.203?  You put an unencrypted backup in the root directory of a USB memory stick, insert it in the Astaro, reboot, and what happens?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Cookie Information Banner