Hi, When reboot the ASG show use the Public IP to access the webadmin but I can't because that link is down. Who change the webadmin to another eth to use the Local IP?
Is this a fresh install or a re-install? Are you saying that the LAN and WAN interfaces have switched NICs or that the Allowed Networks list for WebAdmin has been modified? If your written english is poor, in many cases it is helpful to include screenshots (with private information redacted of course) to help describe your situation.
__________________ ACE v8/SCA v9.3
...still have a v5 install disk in a box somewhere.
Sorry my english, I speak Spanish. I update the Astaro, and I think only the networks list for webadmin as been modified. It's possible fix that? Regards
Happened before. Update might change Astaros NICs order. 1. Try to connect to another Nic with a laptop (don't forget to define the corresponds IP and subnet). 2. Since your Nics order might change, you can also change the Nics order in the back of you machine and try again.
I think only the networks list for webadmin as been modified. It's possible fix that?
You can check the list of allowed networks in WebAdmin>>Management>>WebAdmin Settings. I've never seen this spontaneously change though, so I would guess that your interfaces have changed the NICs that they are bound to due to the update. In the interfaces section of WebAdmin, click on the Hardware Tab and verify that each NIC is assigned the "correct" eth number. If not, you can follow Goldy's instructions or I can tell you how to do this in the filesystem (using SSH or SCP).
__________________ ACE v8/SCA v9.3
...still have a v5 install disk in a box somewhere.
Yes. Easiest and quickest way is with winSCP. The NIC assignments are stored in /etc/udev/rules.d/70-persistent-net.rules. You can do this using a text editor, like VI or joe, from SSH as well. Be very careful and precise. To check ip addresses, using ifconfig from SSH.
__________________ ACE v8/SCA v9.3
...still have a v5 install disk in a box somewhere.
Hi all: I'm experiencing a similiar issue afer upgrading memory to my asg 8.201 sw appliance. Webadmin has stopped listening to the previous address (it was eth3 192.168.254.1) and after reboot it only listens to eth0 172.17.0.1!!! A very stange and weird thing, i've tryied swaping eth numbers in /etc/udev/rules.d/70-persistent-net.rules but it still listens on 172.17.0.1
