Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 110 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

settting up a new internal network

deale2010
I want to have two different networks on two separate interfaces going out the same wan interface.
Ether 0 internal: 192.168.3.1
Ether 1 external: ***.***.***.***
Ether 2 internal: 192.168.1.1
I already have an IPSec site to site VPN connection established on Ether 0 Internal now I want to configure ether 2 internal go out the ether 1 external to the internet not the VPN and I  do not want any of the internal traffic to be able to cross between them self’s .
 All the internet traffic from ether 0 goes through the tunnel.
can some give me instuctions on how to config this scenario


This thread was automatically locked due to age.
Parents
  • 0
    Hi, deal2010, and welcome to the User BB!

    Let me say that in my own words to be sure I understand.  You want both of your internal networks to be able to communicate via VPN to another network.  In addition, you want all internet traffic for 192.168.3.0/24 to go the the internet via the VPN to the other site.  Correct?

    To do this, you need two tunnels:

    Local networks: {192.168.3.0/24}
    Remote Networks: "Internet" and whatever network there your eth0 network should be able to communicae with

    Local networks: {192.168.1.0/24}
    Remote netwrks: whatever network there your eth1 network should be able to communicae with

    The configuration at the other site should mirror this.

    Was that what you were looking for?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Hi, deal2010, and welcome to the User BB!

    Let me say that in my own words to be sure I understand.  You want both of your internal networks to be able to communicate via VPN to another network.  In addition, you want all internet traffic for 192.168.3.0/24 to go the the internet via the VPN to the other site.  Correct?

    To do this, you need two tunnels:

    Local networks: {192.168.3.0/24}
    Remote Networks: "Internet" and whatever network there your eth0 network should be able to communicae with

    Local networks: {192.168.1.0/24}
    Remote netwrks: whatever network there your eth1 network should be able to communicae with

    The configuration at the other site should mirror this.

    Was that what you were looking for?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Cookie Information Banner