This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless AP-10 loose connection

Hello 

I have a Problem with a Astaro AP-10.
Our company has several locations which are connected thru LANoverIP (formerly IPSS).
We have at all Remote locations 1-4 Wireless AP-10 from Astaro.
At our headquarters is the ASG320.

That works fine.
Now i connected a new AP at a Remote location. He connects and gets the config but it always falls out again as soon as someone connects to it.
Other AP's work fine at this Remote location.
the AP's are connected to the same switch and IPSSRouter.

The AP dosent work, but it works at our headquarters where he is "directly" connected to the ASG.

This is what I've tried with several new AP's and also at several locations.
Can you pleas help me ore give me a idea for a solution..

its the AP with the IP 192.168.136.67 in the Logfile.
I have set a filter for 192.168.136. for the log.


Greetings


This thread was automatically locked due to age.
Parents
  • Hi Bob

    I will check this on Monday..
    But the APs are connectet directly to the same switch.
    The AP that works whit ca.30m cable and the problem-AP whit 3m.. 

    I'd only exchanged the AP place between our headquarter and the remote location.
    The AP works fine In the headquarter. But in non of our remote-locations. But the others wich are located in the remote locations works fine..
Reply
  • Hi Bob

    I will check this on Monday..
    But the APs are connectet directly to the same switch.
    The AP that works whit ca.30m cable and the problem-AP whit 3m.. 

    I'd only exchanged the AP place between our headquarter and the remote location.
    The AP works fine In the headquarter. But in non of our remote-locations. But the others wich are located in the remote locations works fine..
Children
No Data