Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 2 subscribers
  • Views 1209 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Stuck at Pattern 21650

Hallowach2
Hi all,

can anybody tell me what pattern version is the latest? I think my ASG (V8.102) is stuck at Pattern 21650 and shows some stange behavior in http proxy (http proxy restarts sometimes, can't download some pdf's)

There were no config changes during the last week.

The up2date.log shows entries like:
2011:04:05-13:55:40 verw-asg320-01 audld[10380]: Starting Up2Date Package Downloader
2011:04:05-13:55:40 verw-asg320-01 audld[10380]: patch up2date possible
2011:04:05-13:55:41 verw-asg320-01 audld[10380]: id="3701" severity="info" sys="system" sub="up2date" name="Authentication successful"

Regards
Manfred


This thread was automatically locked due to age.
Parents
  • 0
    OK - thanks for the reply - was my first thought because there were no change since yesterday morning for the pattern version.

    Some additional information:
    We use HTTP Proxy in AD SSO Mode and SMTP Proxy both with dual scan enabled. No IPS/IM/P2P.

    If the download of a pdf (or an other filetype...) fails the message in the scanning screen is :"Can't allocate memory" (Mem in Dashboard is about 38% on a ASG320 with 2GB Ram, no Swap used)

    If I change from dual scan to single scan the problem seems to disapear.

    Last CLAM update is some days ago.

    Any ideas how to go further?

    Regards
    Manfred
Reply
  • 0
    OK - thanks for the reply - was my first thought because there were no change since yesterday morning for the pattern version.

    Some additional information:
    We use HTTP Proxy in AD SSO Mode and SMTP Proxy both with dual scan enabled. No IPS/IM/P2P.

    If the download of a pdf (or an other filetype...) fails the message in the scanning screen is :"Can't allocate memory" (Mem in Dashboard is about 38% on a ASG320 with 2GB Ram, no Swap used)

    If I change from dual scan to single scan the problem seems to disapear.

    Last CLAM update is some days ago.

    Any ideas how to go further?

    Regards
    Manfred
Children
  • 0 in reply to Hallowach2
    I think there is a known issue in 8.102 with one of the AV scanners... this probably has to be fixed with a firmware up2date.   I've run across this before... it's rare, but there are certain files that will trigger this.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Cookie Information Banner