Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 368 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Installation issue

mangus580
Hi All, trying to install the latest ASG8 on an HP machine.  It has an onboard NIC, and we have added 2 Dlink nics.  For some reason, it detects all 3 (regardless of bios settings)  and will even show link on any of the 3 during installation.  But - when it boots for the first time, the link light goes OUT during boot and will not come back on - this appears to be only on the nic set to be the admin interface.  

Because of this issue I am not able to get into the admin interface and look into the issue any further...

Any ideas?


This thread was automatically locked due to age.
Parents
  • 0
    If the NIC in question is not on the HCL, try a different NIC.  If you are using Version 7, give the Version 8 ISO a shot, it works with more hardware than V7 did.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Reply
  • 0
    If the NIC in question is not on the HCL, try a different NIC.  If you are using Version 7, give the Version 8 ISO a shot, it works with more hardware than V7 did.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Children
No Data
Cookie Information Banner