This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG 7.508 and Network Controller NC375T

Hello 

I just bought a HP ProLiant DL360 with a Network Controller NC375T inside.

After the Installation of Astaro ASG 7.508 I noticed, that the Network Controller is not recognized by the Software.  Booting an Ubuntu Live-CD showed me that the hardware is working fine...

LSPCI gives the following output:
07:00.0 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42)
07:00.1 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42)
07:00.2 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42)
07:00.3 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev 42)

Does anyone have a hint?

Thans s70


This thread was automatically locked due to age.
Parents
  • Anyways, the NC375T is in the 8.3 HCL XML file, but I don't see a 'status' field as to whether it's been verified / tested / expected to work, as the HCL used to have.

    Barry
  • Bump?

    I see the device is also listed for 9 but am also having trouble figuring out if that means it's actually supported? We tried the 375T on 8.30 I believe and, while the device was recognized, it was effectively useless (the interfaces could not be brought up via the front or back-end and no links as a result)
Reply
  • Bump?

    I see the device is also listed for 9 but am also having trouble figuring out if that means it's actually supported? We tried the 375T on 8.30 I believe and, while the device was recognized, it was effectively useless (the interfaces could not be brought up via the front or back-end and no links as a result)
Children
No Data