This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

astaro 320 video question

Hello, I recently starting working on an Astaro 320 and am trying to put in a video card but am having trouble getting it to work.  I'm pretty sure this is an older 320 since it has an 80gb HD and no on board VGA port.  It's got 2 USB in front and back as well as two COM serial ports (1 in the front and 1 in the back).  Every time I plug a video card into the PCI slot, I get nothing.  Also when I try to connect through console with putty I only get a bunch of random characters which is unreadable.  Any suggestions?


This thread was automatically locked due to age.
Parents
  • Hi, lafant, and welcome to the User BB!

    I believe that your's is the first-ever comment of this type concerning an old 320.  I know that there are some older 220s with no 15-pin female VGA port, but that have an on-board VGA controller.  You likely can find info about that by searching site:astaro.org with Google.  I have such a 220, but my first attempt to buy a plastic header for a cable to plug into the motherboard was unsuccessful.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hi, lafant, and welcome to the User BB!

    I believe that your's is the first-ever comment of this type concerning an old 320.  I know that there are some older 220s with no 15-pin female VGA port, but that have an on-board VGA controller.  You likely can find info about that by searching site:astaro.org with Google.  I have such a 220, but my first attempt to buy a plastic header for a cable to plug into the motherboard was unsuccessful.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • The old 320s do have onboard video.  Look for a 15 pin header on the MB.  A standard VGA cable to fit that header should work fine. (basically, pin 1 to pin 1, etc.)  YMMV, however.

    The old 220s did have a wierd pinout; I've had to custom make a cable or two when the oem ones dissappeared.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.