This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

7.507 update not working correctly on my HA slave

Hi,
I have a HA (passive /active configuration). Using Dell servers and the software Astaro 7.504.

I tried to update to version 7.507. But using the webinterface this did not work. The up2date did not start. Using ssh and the command: auisys.plx --rpmargs --force
installed the updates on my master server.
It rebooted and it has version 7.507. so far to good. the status of the slave (some how this is now called Worker), is up2date and is still version 7.504. That is the status for over an hour. Somehow the slave is not updating. How can I kick the slave so it is also updating?

This thread was automatically locked due to age.

Parents

0 BAlfson over 15 years ago
Normally, I think it's the Slave that Up2Dates first.  I wonder if maybe you didn't see that that was happenning and that you caused an interruption of the normal process.  I think I'd recommend that you get Astaro Support involved.

If this is a home installation, then try:
"Break" the HA by turning it "off" in the Master.  This should cause the Slave to do a factory reset and shut down.  If it doesn't then just disconnect the Slave, do a Factory Reset and shut it down.
Download the 7.505-7 Up2Dates from ftp://ftp.astaro.de/pub/ASG/v7/up2date/ into a PC.
With all WAN, LAN and HA connections unplugged, connect the PC to the Slave, power it on, do the basic installation and then manually upload the Up2Dates to the Slave.  When finished Up2Dating it to 7.507, do a factory reset and power the Slave down.
On the Master, enable HA, fill in the fields and confirm that automatic configuration is enabled.
Connect the LAN, WAN and HA cables to the Slave and power it up.  The Master should sync the Slave and you should be back to normal.

If you learn that I've left something out or made a mistake, please come back and comment.

Cheers - Bob
Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 15 years ago
Normally, I think it's the Slave that Up2Dates first.  I wonder if maybe you didn't see that that was happenning and that you caused an interruption of the normal process.  I think I'd recommend that you get Astaro Support involved.

If this is a home installation, then try:
"Break" the HA by turning it "off" in the Master.  This should cause the Slave to do a factory reset and shut down.  If it doesn't then just disconnect the Slave, do a Factory Reset and shut it down.
Download the 7.505-7 Up2Dates from ftp://ftp.astaro.de/pub/ASG/v7/up2date/ into a PC.
With all WAN, LAN and HA connections unplugged, connect the PC to the Slave, power it on, do the basic installation and then manually upload the Up2Dates to the Slave.  When finished Up2Dating it to 7.507, do a factory reset and power the Slave down.
On the Master, enable HA, fill in the fields and confirm that automatic configuration is enabled.
Connect the LAN, WAN and HA cables to the Slave and power it up.  The Master should sync the Slave and you should be back to normal.

If you learn that I've left something out or made a mistake, please come back and comment.

Cheers - Bob
Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data