This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Maybe faulty pattern - Do not reboot!

Hey everyone,

sorry about the double-post, but imho this important enough to be on the mainpage.

There seems to be an actual issue regarding a faulty pattern.

The information I got:
If your box is making some trouble, do not reboot.

After a reboot the hardware appliance may hang with a haldaemon-failure, without any interface showing up.....

If you ran into this issue, here the "official workaround":
(information by astaro-support)

[SIZE="2"]
please do the following steps to bring back the system:

plug a monitor and keyboard to the system

login via root on commandline

If the directories do not exist and there is no connectivity:

  mkdir /opt
  mkdir /opt/inst
  mkdir /opt/tmpfs
  mkdir /opt/tmpfs/run
  mkdir /opt/gnome
  mkdir /opt/gnome/lib
  mount /opt/inst
  rpm -Uvh glib2****** --force (aus /opt/inst)


cp /var/storage/chroot-pop3/usr/lib/libglib-2.0.so.0 /usr/lib/

cp /var/storage/chroot-pop3/usr/lib/libgobject-2.0.so.0 /usr/lib/

Afterwards list all available system backups:

backup.plx –l

choose the lastest backupfile! Excecute the following command:

backup.plx –i /var/confd/var/storage/snapshots/cfg_*****
[/SIZE]

Astaro seems to work on this issue, a "repairing pattern-update" will come soon.

Best regards,
Thomas


(my main-gateway was offline for nearly 4 hours today and had to be re-installed.......)


This thread was automatically locked due to age.
Parents
  • OK gents. I am going to make some educated assumptions here based upon my take from our discussions in this thread and my own observations of my system.

    1. No the firmware update to 7.507 does not cause the the issue of losing the required lib. It was the "pushed" pattern update that was at fault. BUT, the firmware upgrade would force a reboot so if we did not have the safe pattern version before hand, *BOOM* Brick. 

    2. To date the actual pattern version number that caused the problem with the system library has never been released/stated. But we do know that it was quickly fixed by the Astaro team. Since I found this thread this weekend I noticed my pattern did not change from v.20026, so I was not confident that it was the repaired version. As of this morning it is registering pattern v.20037. So I am now confident that it is a repaired version.

    SO, in conclusion I would agree that it is now safe for us to install the 7.507 firmware upgrade as long as your Pattern Version is 20030 or above. Just to be on the safe side and as always, save a configuration backup before applying the update.

    P.S.
    Just a reminder to some of the folks. Some of us are good at what we do. And sometimes that does not include diagnosing, configuring and repairing Linux distros from the command line. Heck, I test and play with Linux distros for different environments all day, yet for the sake of me I still cannot run VI from memory. Yes, I am a recovering Windows convert, but I have seen the light and am working on repenting my old Windows ways. It's just going to take time. So us converts really rely and so deeply appreciate when you all that understand all this stuff write out detailed step by step instructions with explanations. We learn from your knowledge and wisdom, and hopefully do it honor by passing it on to the next person in need.

    So again, much appreciation and gratitude to you all that work so hard to help us Linux newbies.
  • @CyberMuz

    Thanks a ton Brother! for all that information ! u shud be in astaro team  rather [;)]
  • @CyberMuz

    Thanks a ton Brother! for all that information ! u shud be in astaro team  rather [[[;)]]]


    You are quite welcome. It was my pleasure.

    And, I couldn't hang with these bad boys in the Astaro Dev team. I am no where near their level of being a bad @$$ code monkey. I am more of a project coordinator.

    Furthermore,

    I am happy to report that I got all my remote boxes upgraded to 7.507 last night without incident. Some were even starting from v7.504. But they had pattern versions of 2003x and above. Props to all!



    @Richard Walford

    Thank you so much for taking the time to reply to this thread. It means a lot to the community that the development team is participating in these processes with us. Yet, one little point *Chuckle* It has still never been stated exactly what Pattern Version number was at fault. Don't blame me, I am just the messenger. [[[;)]]] At this point, it really doesn't matter. Just a funny observation. You have my most sincerest gratitude anyways. So again, Thank You very much. [[[;)]]]

    P.S.
    Motivation for a resolution = Hell hath no fury like my father who could of woken up to a non-functioning router and couldn't telecommute in the morning. Potential seriously ugly situation.

    Be well my friends!
Reply
  • @CyberMuz

    Thanks a ton Brother! for all that information ! u shud be in astaro team  rather [[[;)]]]


    You are quite welcome. It was my pleasure.

    And, I couldn't hang with these bad boys in the Astaro Dev team. I am no where near their level of being a bad @$$ code monkey. I am more of a project coordinator.

    Furthermore,

    I am happy to report that I got all my remote boxes upgraded to 7.507 last night without incident. Some were even starting from v7.504. But they had pattern versions of 2003x and above. Props to all!



    @Richard Walford

    Thank you so much for taking the time to reply to this thread. It means a lot to the community that the development team is participating in these processes with us. Yet, one little point *Chuckle* It has still never been stated exactly what Pattern Version number was at fault. Don't blame me, I am just the messenger. [[[;)]]] At this point, it really doesn't matter. Just a funny observation. You have my most sincerest gratitude anyways. So again, Thank You very much. [[[;)]]]

    P.S.
    Motivation for a resolution = Hell hath no fury like my father who could of woken up to a non-functioning router and couldn't telecommute in the morning. Potential seriously ugly situation.

    Be well my friends!
Children
No Data