Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 2 subscribers
  • Views 2747 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Restore config from HW appliance to Software

jmmacip
Hi:
One of my customers had a hw 120 device with a broken power supply, we are waiting for hw exchange and i'm trying to restore the appliance config to a Pc with 3 nics. just install a 7.402 and restore the config (from a 7.202 appliance), the machine comes up with the configured nics and IP but no webadmin interface.
Any help will be apreciated.


This thread was automatically locked due to age.
Parents
  • 0
    Running ifconfig on the console will show you the MAC addresses for each NIC; then you can make sure you know which NIC is INT.

    Also, you can use ethtool, ping, etc. to see if the interfaces are connected correctly and working.

    Barry
Reply
  • 0
    Running ifconfig on the console will show you the MAC addresses for each NIC; then you can make sure you know which NIC is INT.

    Also, you can use ethtool, ping, etc. to see if the interfaces are connected correctly and working.

    Barry
Children
No Data
Cookie Information Banner