This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Memory Useage increase over a few days time

Hi I am running the latest ASG 7.501 pattern version  11169, and i have noticed that memory usage reported on the dashboard increases drastically over a 3 day time period. I only have 2 packet filter rules specified and the output of top does not indicate anything out of the ordinary.  Is this an issue that i should be worried about. I am running ASG on an Intel socket 775 3.0Ghz 2mb L2 cache with hyper-threading, i have 3 GB of ram installed and currently the dashboard shows i am using 70% of my ram..i am not sure why this is so high but my reporting indicates this increase is constantly going up


This thread was automatically locked due to age.
  • Hi, when you run top, you can press shift-M to sort by RAM use.

    Barry
  • Top reports the following--this is kind of strange when i had this installed on a different box it never went past 25% ram useage what could be causing this

    top - 14:27:58 up 3 days, 22:00,  1 user,  load average: 0.07, 0.05, 0.01
    Tasks:  94 total,   1 running,  91 sleeping,   0 stopped,   2 zombie
    Cpu(s):  0.2%us,  0.3%sy,  0.0%ni, 99.2%id,  0.3%wa,  0.0%hi,  0.0%si,  0.0%st
    Mem:   3072556k total,  2925488k used,   147068k free,   311768k buffers
    Swap:  1052248k total,        0k used,  1052248k free,   278880k cached

      PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
    20034 root      15  -1  104m  78m 1992 S    0  2.6   1:18.67 snort_inline
     3257 root      18   0 52444  47m 3588 S    0  1.6   0:10.61 mdw_daemon.plx
    10478 wwwrun    16   0 41644  34m 3464 S    0  1.2   0:01.46 index.plx
    10482 root      15   0 34624  18m 2360 S    0  0.6   0:00.16 confd.plx
     2954 root      15   0 31172  17m 3796 S    0  0.6   0:19.73 confd.plx
     4152 root      15   0 24072  16m 2384 S    0  0.6   1:26.94 smtpd.bin
     4220 root      16   0 23928  15m 1900 S    0  0.5   0:03.52 smtpd.bin
     3026 root      16   0 30524  14m 1428 S    0  0.5   0:01.44 confd.plx
     3057 root      16   0 18676  12m 3408 S    0  0.4   0:00.82 notifier.plx
     3074 root      16   0 16596  10m 1824 S    0  0.4   0:00.09 aua.bin
     2963 root      15   0 13800  10m 2096 S    0  0.4   0:49.65 dns-resolver.pl
     3282 root      15   0 15176 9968 2596 S    0  0.3  11:51.03 selfmonng.plx
     4410 root      16   0 11412 8744 2700 S    0  0.3   0:04.04 pfilter-reporte
     4409 root      16   0 11412 8688 2696 S    0  0.3   0:04.70 ips-reporter.pl
     3556 root      16   0 11068 8340 1684 S    0  0.3   0:14.79 named
     4406 root      16   0 10824 8152 2644 S    0  0.3   0:06.22 websec-reporter
     4407 root      16   0 10568 7924 2644 S    0  0.3   0:06.75 mailsec-reporte
     3314 root      16   0 14592 7312  540 S    0  0.2   0:00.11 selfmonng.plx
  • Still having the same issue i have to reboot my astaro box every 3 days due to memory usage increasing to very high levels..for example when running the first hour usage will be around 15% then 12 hours later 25% next day 50% and so on. Im not seeing anything running in the background from the "top" output that is causing this. Very strange issue , i even swapped out the ram and i still had the issue with different memory. Is anyone else having this issue
  • What happens if you DON'T reboot it?

    Barry
  • Hello,

    If i do not reboot, the system completely becomes very sluggish to the point its frustrating which prompts my decision to reboot.
  • Hi,
    before you reboot the ASG, please check top again specifically look at index to see how much memory that is using.

    You could try without hyperthreading enabled.

    Ian M
  • Disabling Hyper-threading in the Bios didnt seem to help  this is very strange checking index on top output  the most mem usage shown  is wwwrun   and that's very small around 1% there has to be some hidden background process running. i can put Astaro back on an much older salvaged HP DV5000 PC with 3GB of regular DDR and a 3Ghz cpu older socket 478 which has no HT and the issue never occurred on that machine mem usage on that machine was around 12% all day everyday. I wonder if its an issue with the Gigabyte Mobo that i am using
  • Still having the same issue i have to reboot my astaro box every 3 days due to memory usage increasing to very high levels..for example when running the first hour usage will be around 15% then 12 hours later 25% next day 50% and so on. Im not seeing anything running in the background from the "top" output that is causing this. Very strange issue , i even swapped out the ram and i still had the issue with different memory. Is anyone else having this issue


    dhaman - I have a similar box as yours with only 1GB DDR RAM - my memroy usage creeps up to anout 70%, but usually does not exceed this amount before the cache /swap is started to be used - and if oyu will leave this and not reboot your box, you will find that the memry will get cleaned up somewhat. I cannot be more specific as I never viewed this as a problem - however, did notice that the memroy usage has been higher than ever before!?  [:S]

    Thanks

    Mick

    Wink

  • if i run an older  7.3 Asg build the memory increase never happens so i am wondering if i have exposed an unknown bug in the 7.501 version. The 7.502 available update doesn't state that it fixes this memory  issue so i never updated that
  • Disabling Hyper-threading in the Bios didnt seem to help  this is very strange checking index on top output  the most mem usage shown  is wwwrun   and that's very small around 1% there has to be some hidden background process running.


    Hi, you're pressing shift-M in top, right?

    Barry