This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No Internet connection for clients

I installed my first Astaro a coupe of days ago on an Intel Atom board with a dual core Atom, 2 GB RAM. It is running with no problems so far.

I have been trying to install another system so that I can test site-to-site VPN connectivity. However, I have installed on three different computers from an old HP Dual Xenon, a newer SuperMicro Xenon, and a Dell T105 and I am unable to connect to the Internet from any client. I can ping external addresses from the Astaro box but I cannot ping past the external IP address of the Astaro box from a client. I cannot get to any Web site either, I just get a time out. This is happening on three different systems but they are configured the same as the first install that I did. 

Did I miss some switch that turns the system to allow clients to connect? This is driving me crazy because I can't help but think that I have overlooked something simple.


This thread was automatically locked due to age.
Parents Reply Children
  • Here is the only rule set up (it was set up by the install). This is the same as on the Astaro install that is working.

    I am going to install Untangle to see if it works. I do not think it is my hardware (I have tried on 3 different systems) but I guess it's a possibility. Funny thing is my working install in on a low cost system - Jetway Intel Atom board with the 3 port GB NIC add on card. Worked with no problems from the start. The other systems are higher end but one is an older dual Xenon, one is a fairly new SuperMicro Quad Core Xenon, and the other is a Dell T105, dual core Athlon. None of the systems had any problems with the hardware detection.