This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cheap, fanless, small Astaro whitebox for home use

Hi folks,
I often use astaro firewalls in our company and I really like this product.

So I planed to "build" a whitebox for home use. I only need spam filter and the remote acess (SSL and PPTP as fallback). So I can use the free license.

I found lots of white boxes in the signatures of some board members. But I have some special requirements:

1. fan less (very important) --> the box is in my home office and I dont like loud devices
2. small --> prefered is, that the box is smaller then a barebone  --> maybe the size of an synology harddrive?
3. cheap --> 300 till 400 Swiss francs this means 290 til 380 US Dollars.
4. support for 2 NICs (maybe later I will use this a firewall)

In the next few months I am going to migrate my server to a new hardware which is a shuttle barebone with microsoft hyper-v server. But there is no astaro support for hyper-v.

It would be nice, if you put your hardware specs, the total cost and some pictures in this thread. Other persons might also interessted in this.

Greetings from Switzerland
Marco


This thread was automatically locked due to age.
Parents
  • I have been using a mini-ITX Jetway J7F2WE1G2E motherboard (1.2 GHz Eden C7 fanless 7W TDP with 1x 10/100 NIC) combined with a Jetway daughter-card AD3RTLANP triple 10/100 NICs using Realtek RTL8100C chips for a total of four NICs.  It's housed in a Morex 3677 enclosure with 1GB RAM, 2.5" harddrive, and CDROM drive.  I had problems with the initial motherboard running hot and rebooting, and I got a replacement under warranty that has worked better.  But running fanless, it still suffers occasional reboots, so now I run a case fan.

    Don't get the triple GigaEthernet daughter card, as I initially did, as its Realtek chips are not supported by ASG drivers.
Reply
  • I have been using a mini-ITX Jetway J7F2WE1G2E motherboard (1.2 GHz Eden C7 fanless 7W TDP with 1x 10/100 NIC) combined with a Jetway daughter-card AD3RTLANP triple 10/100 NICs using Realtek RTL8100C chips for a total of four NICs.  It's housed in a Morex 3677 enclosure with 1GB RAM, 2.5" harddrive, and CDROM drive.  I had problems with the initial motherboard running hot and rebooting, and I got a replacement under warranty that has worked better.  But running fanless, it still suffers occasional reboots, so now I run a case fan.

    Don't get the triple GigaEthernet daughter card, as I initially did, as its Realtek chips are not supported by ASG drivers.
Children
No Data