This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Intel G31 chipset... will it work?

I am looking at a new PC for my Astaro build.  This mtherboard uses the Intel G31 chipset.  Has anyone been able to install using this chipset?

I did a search on the forums and got 0 hits.  I did a google search and found this unresolved post:

https://community.sophos.com/products/unified-threat-management/astaroorg/f/95/t/67390

Anyone running dual core with a motherboard that you can still buy?  I would like to have four PCI slots, but three would do.

Thanks,

C68

This thread was automatically locked due to age.

0 Edwin_01 over 16 years ago in reply to Coder68

I used the version 7.402. Should be the latest version :/
Cancel
Vote Up 0 Vote Down

Cancel
0 Simon Shaw over 16 years ago in reply to Edwin_01

Astaro and many other linux distos don't support the recent Intel chipsets [:@]

ICH10 systems are especially bad. Did you try the setting mentioned in the other thread?

I got a ICH10 system to work by disabling the onboard SATA controller and installing a cheap Promise SATA controller.
However mine wasn't hanging like yours.

Anyone got any suggestions on new Intel CPU motherboards that do work with Astaro/ESX etc?
Cancel
Vote Up 0 Vote Down

Cancel
0 Edwin_01 over 16 years ago in reply to Simon Shaw

ICH10 systems are especially bad. Did you try the setting mentioned in the other thread?

But my mainboard is an ICH7 :/

What other thread did you mean?

Btw. wrote a support ticket and got the answer that they haven't tested it yet and I should consider the HCL... Not the answer I hoped to get [:(]

Trying to return my mainboard now, maybe I'll get an AMD system (which I usually use ALWAYS)...

But I'll try the tip with the additional SATA controller! Thx [:)]
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 16 years ago in reply to Edwin_01

You could also try the beta ISO.

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 eganders_01 over 16 years ago in reply to BarryG

Barry:

What new hardware are they working at supporting in terms of motherboards, in the beta?
Cancel
Vote Up 0 Vote Down

Cancel
0 Edwin_01 over 16 years ago in reply to eganders_01

Tried the newest beta's, too, didn't help...

Funny: When was the HCL updated the last time??? I can't find any of "newer" chipsets in it!!! [:S]
Cancel
Vote Up 0 Vote Down

Cancel
0 Simon Shaw over 16 years ago in reply to Edwin_01

But my mainboard is an ICH7 :/

What other thread did you mean?

Yeah, ICH7 should work, I think... Have you got a PATA drive you can try? Assuming the board has a PATA connection.
ICH10 on SATA definately does not work.

The other thread was:
http://www.astaro.org/closed-forums-read-only/asg-v7-400-beta-closed/24714-try-install-7-395-asus-p3-p5g31-intel-g31.html#post104170

"Try this at the install command line.
default noapic acpi=off debug"

Most of my Astaro boxes are on AMD hardware which just seems to work...
Cancel
Vote Up 0 Vote Down

Cancel
0 Coder68 over 16 years ago

See my other post here here.

C68
Cancel
Vote Up 0 Vote Down

Cancel