Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 2 subscribers
  • Views 1620 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Astaro Admin Page

wingman
I am trying to access Astaro's GUI via LAN by I get a timeout connection

Configuration:
WAN
!
!
astaro ---- lan router


lan router: 192.168.11.0/24

Astaro:192.168.2.100/24

I can ping the device from a client (i.e 192.168.11.4)
Any help would be much appreciated


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to wingman
    Any help guys? Unfortunately the Workstation is on different subnet (192.168.11.x)and I don't know how to connect to the GUI(192.168.2.x)
  • 0 in reply to wingman
    What is the router's external IP and netmask? (Is it in the 192.168.2.0/24 network?)

    Barry
  • 0 in reply to wingman
    Any help guys? Unfortunately the Workstation is on different subnet (192.168.11.x)and I don't know how to connect to the GUI(192.168.2.x)


    Simple, just temporarily add an Ip in the 192.168.2.x network range as an additional IP on a workstation that can reach the unit via the eth0 interface... if the Astaro is listening on teh 192.168.2.100 IP (the default for appliances) then you should be able to reach it that way.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • 0 in reply to BarryG
    BarryG:
    external Wireless router : 192.168.11.0/24

    astaro eth0 192.168.2.100 /24

    BlucekConvergent:

    I tried to add a static ip on my laptop 192.168.2.x /24 with gateway 192.168.11.1 but doens't seem to work. Is that what you mean?
  • 0 in reply to wingman
    First, although I don't have any experience with bridging a home Astaro behind a router, there are others who do, and that sounds like a fundamental issue that you'll need to address once you can access the Astaro.

    Set the laptop's gateway address to 192.168.2.100.
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    I 've already tried this but doesn't work

    the wireless router  has the following config
    192.168.11.1--Gateway 
    192.168.11.x (pool of 10 adresses)

    the router is connected via ethernet to 192.168.2.100 eth0 interface (Astaro.)

    I can connect direclty if I unplug the wireless router but I want to be able to access the Astaro GUI via the external router.
  • 0 in reply to wingman
    It sounds like you need to add a static route in your home router or change its subnet to /16, but I don't think this setup will work the way you think you want it to.  Read up on bridging and search here for suggestions.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    I ve just add a small hub I had and I know have proper access whenever I want to access the GUI [:)]
    Thanks for the help
Cookie Information Banner