This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

7.1 Update - Outgoing Traffic Problem

franky1974 over 18 years ago

I have updated to 7.1 from 7.011. After the update, i started having problems with outgoing email. Blackberry server is not communicating SRP. Nothing has changed since upgrade. What could it go wrong?

We have internet connection, but pinging is not working anymore.

Any help would be appreciated.

This thread was automatically locked due to age.

Parents

0 franky1974 over 18 years ago

To make it clearer, pinging internet addresses does not work anymore.
Cancel
Vote Up 0 Vote Down

Cancel
0 franky1974 over 18 years ago in reply to franky1974

I have ASG320 and if nothing works, I am willing to rebuild it with 7.011 because I have a backup file for 7.011. If anyone has no idea, instructions to resbuild ASG320 with 7.011 iso file would be helpful.
Cancel
Vote Up 0 Vote Down

Cancel
0 franky1974 over 18 years ago in reply to Keith_M

1 default gateway on the firewall - correct.
Cancel
Vote Up 0 Vote Down

Cancel
0 Keith_M over 18 years ago in reply to franky1974

can you show me your masq rule
Cancel
Vote Up 0 Vote Down

Cancel
0 Keith_M over 18 years ago in reply to Keith_M

wrong net mask on external interface?
I know I am grasping at straws.
Cancel
Vote Up 0 Vote Down

Cancel
0 franky1974 over 18 years ago in reply to Keith_M

I have reset the router and firewall.

Here is the masq rule.

VPN Pool (SSL) -> External
ASC (astaro secure client) -> External
Internal (Network) -> External
Cancel
Vote Up 0 Vote Down

Cancel
0 franky1974 over 18 years ago in reply to Keith_M

Subnet mask is fine. just checked. I know it is very weird...
Cancel
Vote Up 0 Vote Down

Cancel
0 Keith_M over 18 years ago in reply to franky1974

ok - what if you try this
Reset to factory defaults
create just the interfaces and 1 masq and packet filter rule and see if it works.

We can always restore your config to where you are now.
Cancel
Vote Up 0 Vote Down

Cancel
0 franky1974 over 18 years ago in reply to Keith_M

I reset to the factory defaults and created interfaces, 1 masq and packet filter rule, but it is not working. I cannot use internet. What am i doing wrong?
Cancel
Vote Up 0 Vote Down

Cancel
0 Keith_M over 18 years ago in reply to franky1974

if you want to shoot me a private message with ip and setup a username and password I can take a look.
Cancel
Vote Up 0 Vote Down

Cancel
0 eganders_01 over 18 years ago in reply to Keith_M

Did you try BruceKConvergent's fix on another thread? He found that after the upgrade to 7.1 he suddenly needed to use a crossover cable to his external connection. That the new drivers for 7.1 for the NIC to his external connection didn't support MDI/MDI-X on board the NIC anymore. Go figure.
Cancel
Vote Up 0 Vote Down

Cancel
0 Igor.DeCamps over 18 years ago in reply to eganders_01

Did you try BruceKConvergent's fix on another thread? He found that after the upgrade to 7.1 he suddenly needed to use a crossover cable to his external connection. That the new drivers for 7.1 for the NIC to his external connection didn't support MDI/MDI-X on board the NIC anymore. Go figure.

Now that would be a kicker... But I think he reverted back to the 7.011 Image which would have the old drivers that worked, before the update...
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Igor.DeCamps over 18 years ago in reply to eganders_01

Did you try BruceKConvergent's fix on another thread? He found that after the upgrade to 7.1 he suddenly needed to use a crossover cable to his external connection. That the new drivers for 7.1 for the NIC to his external connection didn't support MDI/MDI-X on board the NIC anymore. Go figure.

Now that would be a kicker... But I think he reverted back to the 7.011 Image which would have the old drivers that worked, before the update...
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data