Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 506 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware experiences

ja30278
I saw an older post that referenced installing ASG 7 on a Sun x2200. Anyone have updated impressions/results from the x2100 or x2200 (m2 or otherwise)?

Barring that, can anyone give recommendations on solid 1u hardware with raid support, at least 3 NICs, and redundant PSUs? The HCL seems pretty sparse with up-to-date hardware. I don't think most of the off-the-shelf systems they spec are still being sold in the same configuration.


This thread was automatically locked due to age.
Parents
  • 0
    We've typically used Dell hardware, though we usually use 2U units so that we have room to add more NICs if we need to. Logic Supply has some 4-port NICs which work great and are very reasonably priced.

    Typically you need to be the most careful with the RAID card selection and sometimes NIC selection. We've had compatibility issues in the past using v6 notably with RAID controllers, especially with anything that used a megaraid driver, but v7 should be better in this area.
Reply
  • 0
    We've typically used Dell hardware, though we usually use 2U units so that we have room to add more NICs if we need to. Logic Supply has some 4-port NICs which work great and are very reasonably priced.

    Typically you need to be the most careful with the RAID card selection and sometimes NIC selection. We've had compatibility issues in the past using v6 notably with RAID controllers, especially with anything that used a megaraid driver, but v7 should be better in this area.
Children
No Data
Cookie Information Banner