Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 648 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hp Dc5700

abedfarah
We used to install Astaro on HP DC5100 without any problem, the new successor HP DC5700 will only install Astaro in classic mode. After installing Astaro in classic mode, the system will not boot!!!!


Full specs for HP DC5700
http://h18000.www1.hp.com/products/quickspecs/12545_na/12545_na.HTML#Technical%20Specifications%20-%20Communications

Abed


This thread was automatically locked due to age.
  • 0
    Hi,

    which ASG version did you use?  Output of dmesg would be helpfull (serial console!) or otherwise a photo of the screen.

    Please provide output of 'lspci -vvnx', 'lspci -vvxn' and 'hwinfo -all'.
  • 0 in reply to HolgerE
    You need to add a grub boot option: pci=nommconf
    That solves this problem on a HP DC7700.  So far I haven't figured out a way to make the change permanent.  It has to be entered every time you boot the computer.

    Craig
  • 0 in reply to cbarnhart
    You should be able to make the change permanant by editing /etc/lilo.conf in V6 and /boot/grub/menu.lst in V7.
  • 0 in reply to drees
    System configuration attached...

    I get multiple hard drive errors during boot... (see dmesg.txt)

    slated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
    ata2: no sense translation for error 0x20
    ata2: no sense translation for status: 0x51
    ata2: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04

    mysql fails to load on occasion and the webadmin's dashboard says the CPU overloaded.
    hwinfo.zip
Cookie Information Banner