This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASL V 5.208 4 nics -hw problem ???-

hi,
i need to install 4 PCI nics ( 3com 905cx ) on a IBM xseries 200 but something goes wrong...
no hardware conflict was detected but 2 of the 4 nics are sharing the same IRQ ( irq10 ); if i try to enable both this interfaces one of them stop responding.

any one knows about any conflict / problem in this configuration ?

In a 3 nics configuration everything works; changing the interface with another brand/model didn't solve this problem.
tnks

This thread was automatically locked due to age.

Parents

0 KKnecht over 20 years ago

Did you check BIOS settings, maybe reserved IRQs ?
Disabled unneded features (Audio, serial, USB etc.)
Latest BIOS installed ?
Cancel
Vote Up 0 Vote Down

Cancel
0 Hellen over 20 years ago in reply to KKnecht

all bios unneeded feature disabled; no reserved irqs.

i'm looking for a bios update but specifications don't seems to solve irq conflict problem or bus master optimization.
Cancel
Vote Up 0 Vote Down

Cancel
0 ronzle over 20 years ago in reply to Hellen

Hi Hellen

Did you try the classic installation ?
if you boot from CD you have to type after boot: classic

Best regards
Ronny
Cancel
Vote Up 0 Vote Down

Cancel
0 Hellen over 18 years ago in reply to ronzle

problem solved with another NIC ( 3com 905c ); the firewall was already installed and the 4th adapter was added on a second time.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Hellen over 18 years ago in reply to ronzle

problem solved with another NIC ( 3com 905c ); the firewall was already installed and the 4th adapter was added on a second time.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data