This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PRoblem installing 6.0

Im trying to install ASL 6 with a bootable cd-rom image.

It boots and presents me with the install alternatives. Whatever I choose here I get the same problem. It initiates unpacking of the image or something with dots on the screen representing progress. After about 5-6 rows of these dots it displays the message "Ready." and then reboots.

Back to square one.

Any ideas?

This thread was automatically locked due to age.

Parents

0 BarryG over 20 years ago

I seem to be having a similar problem on a known good Intel i810 board. I posted about it here

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 netra over 20 years ago in reply to BarryG

I tested the memory with memtest so np there.
Ive been running Smoothwall and Monowall on this machine with no problems.

My guess was that it reboots just as the installer is about to unpack the image. I therefore tried two hardrives but no luck there.

It seems to be the same problem indeed, Barry.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 netra over 20 years ago in reply to BarryG

I tested the memory with memtest so np there.
Ive been running Smoothwall and Monowall on this machine with no problems.

My guess was that it reboots just as the installer is about to unpack the image. I therefore tried two hardrives but no luck there.

It seems to be the same problem indeed, Barry.
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 BarryG over 20 years ago in reply to netra

What motherboard/chipset/cpu do you have?

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 20 years ago in reply to netra

In the other thread, William has suggested trying
noapic nousb
at the boot prompt

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 netra over 20 years ago in reply to BarryG

I tried all the alterntives but no luck, som Im giving up on this and continue to run monowall
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 20 years ago in reply to netra

For the record, can you post what motherboard, chipset, and CPU you're using?

Thanks,
Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 netra over 20 years ago in reply to BarryG

Its a Compaq Presario 5441. I think it has a 233 or 400 Mhz AMD K6-2. Yes I know what u thinking its crap but hey it works and its small [:)]
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 20 years ago in reply to netra

OK... that CPU probably isn't supported in ASL 6 (6 requires real 686 support). However, I'm not that familiar with the K6 processors so I could be wrong.

I think version 5 should work fine, but the web interface will be a little slow.

v5 should be supported for another year at least.

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 netra over 20 years ago in reply to BarryG

I see the CPU must be the problem then. Whats the difference between 5 & 6? I know prolly alot of stuff but whats the big picture?
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 20 years ago in reply to netra

The web interface in 6 seems much faster on PIII hardware (5 is kind of slow).

New features include transparent (bridged) mode, SIP proxy, ...

There is a "what's new in ASL 6" PDF at
http://www.astaro.com/firewall_network_security/security_facts
The file seems to be missing the .PDF extension... you might need to save it and rename it.

Barry
Cancel
Vote Up 0 Vote Down

Cancel