Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 685 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[6.001] Dialup interfaces don't work

drees
I had the same problem under 5.900 and previous betas, see here: [5.900] Dialup doesn't Dial

The dialup interface never seems to open the serial port and send the modem commands when turning on the interface.  5.203 worked OK.  Anyone else get a dialup interface working on ASL v6?

hwinfo picks it up OK:
Code:
58: Serial 00.0: 10200 Modem
  [Created at modem.446]
  Unique ID: Fyby.fox4xai0M_B
  Parent ID: S_Uw.3fyvFV+mbWD
  Hardware Class: modem
  Model: "Microcom DeskPorte 56K Voice"
  Vendor: "Microcom"
  Device: "DeskPorte 56K Voice"
  Device File: /dev/ttyS0
  Speed: 115.2 kbps
  Init1: ATZ
  Init2: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #38 (Serial controller)


This thread was automatically locked due to age.
Parents
  • 0
    Upgraded to 6.004 and while the dialup device will attempt to dial OK, it does not ever seem to retry the connection if it fails for some reason, forever leaving it in the down state.  Below is a snippet from the PPP Daemon log as an example:
    Code:
    2005:09:22-15:47:25 (none) chat[21266]: ATH0^M^M
    2005:09:22-15:47:25 (none) chat[21266]: OK
    2005:09:22-15:47:25 (none) chat[21266]: -- got it
    2005:09:22-15:47:25 (none) chat[21266]: send (^MATZ^M)
    2005:09:22-15:47:25 (none) chat[21266]: expect (OK)
    2005:09:22-15:47:25 (none) chat[21266]: ^M
    2005:09:22-15:47:25 (none) chat[21266]: ^MATZ^M^M
    2005:09:22-15:47:25 (none) chat[21266]: OK
    2005:09:22-15:47:25 (none) chat[21266]: -- got it
    2005:09:22-15:47:25 (none) chat[21266]: send (ATDT9297075^M)
    2005:09:22-15:47:26 (none) chat[21266]: timeout set to 45 seconds
    2005:09:22-15:47:26 (none) chat[21266]: expect (CONNECT)
    2005:09:22-15:47:26 (none) chat[21266]: ^M
    2005:09:22-15:47:34 (none) chat[21266]: ATDT1234567^M^M
    2005:09:22-15:47:34 (none) chat[21266]: NO DIALTONE
    2005:09:22-15:47:34 (none) chat[21266]: -- failed
    2005:09:22-15:47:34 (none) chat[21266]: Failed (NO DIALTONE)
    2005:09:22-15:47:34 (none) pppd[21192]: Connect script failed
    2005:09:22-15:47:34 (none) pppd[21192]: Exit. 
    Anyone ever get dialup with a modem working reliably?  My goal is to be able to fail over to the dialup modem if the primary link goes down, but if I can't get a dialup link working OK on it's own, I can't go much further.
  • 0 in reply to drees
    got the same problem with 2 different modem [:(]
Reply Children
Cookie Information Banner