Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 1231 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

problem with ppp with serial modem

gforces
Hi - I'm trying to set up a dialup configuration via serial modem but when the modem attempts to dial I can hear the busy tone and the lppp log shows as follows:
2005:01:26-15:22:12 (none) chat[2211]: expect (OK)
2005:01:26-15:22:12 (none) chat[2211]: ^M
2005:01:26-15:22:12 (none) chat[2211]: ATH0^M^M
2005:01:26-15:22:12 (none) chat[2211]: OK
2005:01:26-15:22:12 (none) chat[2211]: -- got it
2005:01:26-15:22:12 (none) chat[2211]: send (^MATZ^M)
2005:01:26-15:22:12 (none) chat[2211]: expect (OK)
2005:01:26-15:22:12 (none) chat[2211]: ^M
2005:01:26-15:22:12 (none) chat[2211]: ^MATZ^M^M
2005:01:26-15:22:12 (none) chat[2211]: OK
2005:01:26-15:22:12 (none) chat[2211]: -- got it
2005:01:26-15:22:12 (none) chat[2211]: send (ATDTATDT1893242242^M)
2005:01:26-15:22:13 (none) chat[2211]: timeout set to 45 seconds
2005:01:26-15:22:13 (none) chat[2211]: expect (CONNECT)
2005:01:26-15:22:13 (none) chat[2211]: ^M
2005:01:26-15:22:23 (none) chat[2211]: ATDTATDT1893242242^M^M
2005:01:26-15:22:23 (none) chat[2211]: BUSY
2005:01:26-15:22:23 (none) chat[2211]: -- failed
2005:01:26-15:22:23 (none) chat[2211]: Failed (BUSY)
2005:01:26-15:22:24 (none) pppd[2158]: Exit.
2005:01:26-15:25:24 (none) chat[2392]: abort on (NO CARRIER)
2005:01:26-15:25:24 (none) chat[2392]: abort on (NO DIALTONE)
2005:01:26-15:25:24 (none) chat[2392]: abort on (\nRINGING\r\n\r\nRINGING\r)
2005:01:26-15:25:24 (none) chat[2392]: abort on (ERROR)
2005:01:26-15:25:24 (none) chat[2392]: abort on (N


This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to blah
    Hello gforces/blah,

    if your modem is not directly connected (means via Telephone system)
    you need to tell the modem NOT to wait for the dial tone.
    Most modems doing this by sending either ATX3 or ATX4.
    For correct value check the manual.

    Karsten
Children
No Data
Cookie Information Banner