Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 2 subscribers
  • Views 1321 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Does the 5.1 solve the 3Com 3C905C-TX problem?

dayvid
I had to resolve back to 5.26 because my NIC 3Com 3C905C-TX want recognized anymore when i turned to 5.27.


This thread was automatically locked due to age.
Parents
  • 0
    We have three of them in our box, worked perfectly from 5.012 to 5.027.
  • 0 in reply to Snova
    I saw that the apci was failing.
    I'm using a smp kernel.
  • 0 in reply to dayvid
    With SMP kernel you can disable apci with 'smp noapic acpi=off' on boot prompt.

    Xeno
  • 0 in reply to Xeno
    Strange, I have 3 cards of 3Com 3C905C-TX (eth0,1,2) and 2 Intel onboard NIC but ASL at Hardware List identifies only eth1 and eth2

     Sys ID   Name/Parameters   PCI Device ID   
      eth0   NIC shares IRQ 11 irq=11   type=eth   mac=00:04:75:fc:3f:80          
      eth1   3Com 3C905C-TX Fast Etherlink for PC Management NIC irq=9   type=eth   mac=00:04:75:fc:3e:19          
      eth2   3Com 3C905C-TX Fast Etherlink for PC Management NIC irq=10   type=eth   mac=00:04:75:fc:3e:1a          
      eth3   NIC shares IRQ 11 irq=11   type=eth   mac=00:0c:f1:6e:b1:96          
      eth4   NIC shares IRQ 11 irq=11   type=eth   mac=00:0c:f1:6e:b1:98   
  • 0 in reply to WaMaR
    Did you test the mentioned option above? Are the NICs added to /etc/modules.conf and /etc/modules? Did you plug in the NICs after installation?
    Are the NICs on HCL ?

    Xeno
Reply Children
No Data
Cookie Information Banner