This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Which optical NICs are supported?

Planning to replace some 100BaseT-NICs with 1000BaseSX ...

Which 1000BaseSX-NICs will be supported by ASL?
Sorry, couldn't find any useful information in the HCL or in this forum.

TIA,
Stefan

This thread was automatically locked due to age.

Parents

0 William Warren over 21 years ago

if it is not on the HCL then none are officially supported..i would give it a whirl though sometimes things just work..[:)]

Owner: Emmanuel Technology Consulting

http://etc-md.com

Former Sophos SG(Astaro) advocate/researcher/Silver Partner

PfSense w/Suricata, ntopng,

Other addons to follow
Cancel
Vote Up 0 Vote Down

Cancel
0 Stefan Biebl over 21 years ago in reply to William Warren

[ QUOTE ]
if it is not on the HCL then none are officially supported..i would give it a whirl though sometimes things just work..[:)]

[/ QUOTE ]

ok, another try:

is there anybody out there with working 1000BaseSX-NICs???
Cancel
Vote Up 0 Vote Down

Cancel
0 synopex over 21 years ago in reply to Stefan Biebl

http://docs.astaro.org/HCL-5.0.txt
Cancel
Vote Up 0 Vote Down

Cancel
0 Stefan Biebl over 21 years ago in reply to synopex

[ QUOTE ]
http://docs.astaro.org/HCL-5.0.txt

[/ QUOTE ]
thank you, I've searched this document before my post, but which of those NICs are 1000BaseSX?
Cancel
Vote Up 0 Vote Down

Cancel
0 William Warren over 21 years ago in reply to Stefan Biebl

you avhe the information from the hcl..why not simply do a little bit of research on google yourself?

Owner: Emmanuel Technology Consulting

http://etc-md.com

Former Sophos SG(Astaro) advocate/researcher/Silver Partner

PfSense w/Suricata, ntopng,

Other addons to follow
Cancel
Vote Up 0 Vote Down

Cancel
0 Stefan Biebl over 21 years ago in reply to William Warren

[ QUOTE ]
you avhe the information from the hcl..why not simply do a little bit of research on google yourself?

[/ QUOTE ]
as mentioned above I didn't find anything useful ...
Cancel
Vote Up 0 Vote Down

Cancel
0 William Warren over 21 years ago in reply to Stefan Biebl

interesting..so looking up the model numbers on google yeilds nothing?

Let's look at a few:
NetXtreme BCM5703 Gigabit Ethernet(google results show it is a 1000 basetx card)
jsut for one instance. The informaiton is there..jsut take some time to figure it uout..from what i see there are no SX boards supported..so install it with some SX nics and see if it works..

Owner: Emmanuel Technology Consulting

http://etc-md.com

Former Sophos SG(Astaro) advocate/researcher/Silver Partner

PfSense w/Suricata, ntopng,

Other addons to follow
Cancel
Vote Up 0 Vote Down

Cancel
0 JimmyM over 21 years ago in reply to William Warren

I think what Stefan is saying is that his fiber NIC is not specifically listed but has anyone had success with anything like his NIC that's not listed on the HCL. The HCL is not the last word in compatibility. True, it may not be supported, but it may function just fine otherwise.
Cancel
Vote Up 0 Vote Down

Cancel
0 William Warren over 21 years ago in reply to JimmyM

which leads back to the point of..if it is not on the hcl..isntall the firewall and see if it works..[[:)]] my linksys cards are not listed on the acl..so i tried them(took all of 15 minutes) and they work great..i notified astaro and the hcl now reflects this..[[:)]]

Owner: Emmanuel Technology Consulting

http://etc-md.com

Former Sophos SG(Astaro) advocate/researcher/Silver Partner

PfSense w/Suricata, ntopng,

Other addons to follow
Cancel
Vote Up 0 Vote Down

Cancel
0 Stefan Biebl over 21 years ago in reply to William Warren

i don't have any SX-NICs available to test with ... and buying just a bunch of them only to find out which are supported is a little bit expensive ...

Again: who has successfully set up an ASL box with optical NICs? And, please, no more links on HCL and Google ...

Thanks,
Stefan
Cancel
Vote Up 0 Vote Down

Cancel
0 oliver.desch over 21 years ago in reply to Stefan Biebl

Stefan Biebl,

Syskonnect SK9843 is working in version 4 very well but unfortunately the current driver used in version 5 is crashing the kernel under certain circumstances. As soon as we find some time we will compile the most recent version of the driver (I was in touch with Syskonnect already) and test it in the labs.

As far as I know all fiber cards based on chipsets mentioned in the HCL should work since only the transmitter/receiver unit is a different. I know this information is not satisfying at this point, sorry

read u
o|iver
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 oliver.desch over 21 years ago in reply to Stefan Biebl

Stefan Biebl,

Syskonnect SK9843 is working in version 4 very well but unfortunately the current driver used in version 5 is crashing the kernel under certain circumstances. As soon as we find some time we will compile the most recent version of the driver (I was in touch with Syskonnect already) and test it in the labs.

As far as I know all fiber cards based on chipsets mentioned in the HCL should work since only the transmitter/receiver unit is a different. I know this information is not satisfying at this point, sorry

read u
o|iver
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data