Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 1187 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware

vogonfleet
I want to install a Astaro 4.017 or 4.777 on a HP DL140.
The internal Network Cards are not detected in the install process. IS there any way to get this solved ? The internal Card are 2 Broadcom 7771 1 Gbit .  


This thread was automatically locked due to age.
Parents
  • 0
    maybe these nics work with the tg3.o module.

    try to edit /etc/modules.conf and insert:
    alias eth0 tg3
    alias eth1 tg3
    .
    .
    .

    we are running a new dl320 with (same?) broadcom nics and they are working  with these modules:

    tg3.c:v2.3 (November 5, 2003)
    eth0: Tigon3 [partno(N/A) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 
    eth1: Tigon3 [partno(N/A) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet

    greets,

    gnjb  
  • 0 in reply to gnujuba
    Thanks,
    this has worked with me.

    By the way , did you try to install the smp-kernel ?
    By installing the smp-kernel no network card was deteced,
    even if we put a Intel 100pro inside.

    bye  
  • 0 in reply to vogonfleet
    sorry, no experience with smp and asl. the dl 320 from above is running a standard debian.
    but with a custom kernel (2.4.25) hyper threading (smp kernel) is working fine.

    greets,

    gnjb   
  • 0 in reply to gnujuba
    Finally i solved the problem.

    Just do the following at booting from CD .

    boot:> smp noapci apci=off

    Everything is fine now.

    Thanks for your help.

    Fredo  
Reply Children
No Data
Cookie Information Banner