This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

how to make a bootdisk....computer cannot boot the cd-rom?

hello boardies

problem:
one computer on wich i would like to install asl 3.209 cannot boot from cd.

can somebody tell me how to make a boot disk, with ipcop that was very simple:-/

thanks
ChokuRei


This thread was automatically locked due to age.
Parents Reply Children
  • thanks to oliver and riccardo

    you convinced me to buy a new computer:-9

    ChokuRei
  • Another option: if you have an SCSI controller (e.g. the famous 1542) and an according CD-ROM just plug it (temporarily) into your FW-box-to-be. Usually the SCSI controller can boot off an CD-ROM by its own BIOS (using dirty tricks like faking the CD bootblock as Floppy device A: )
  • > thanks to oliver and riccardo
    > you convinced me to buy a new computer:-9
    > ChokuRei 

    Why?
    If you go to link over here, you can download a little program to make boot from floppy and then select your boot device.
    It is useful if your bios hasn't boot from cdrom.

    bye
    Riccardo
  • If your CDRom isnt bootable, you will need to make a boot disk.

    Easiest way is to start a Windoez machine and put in the CD. Open up a command prompt and do the following:

    cd d: (drive letter)
    cd dosutils
    rawrite (at this point its useful to have a floppy disk installed)
    Follow the on screen prompts. This will make a boot floppy that I have found will make most things work, including some very annoying SCSI problems. 

    Enjoy