Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 608 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PLEASE HELP!!!!!! - Webserver, Dns in DMZ Troubles!!!

cbarone
Hello All,

I am using Astaro 3.0.51 with a 384/768 DSL connection. 

Nics

eth0 (internal) - 192.168.1.100
eth1 (external) - 216.158.41.53
eth2 (DMZ) - 216.158.41.51 (Note! should this be on a different subnet?)

I have a block of ips from my dsl provider 216.158.41.0/29.  My default gateway is 216.158.41.49 for these Ips.

I only have one server in the DMZ which acts as a public DNS/Web server. 

I really need help with this setup and want to go live with two of my personal informational sites.

I need help with the proper packet filtering rules, dnat (if necessary), proxy arp?

Thanks

cbarone@dca.net

I was getting a strange error on the install of 2.0.16, that is why I installed 3.0.51. Something about scsi failed. I dont even have a scsi drive. When I choose an installation other than US-American I can get to the end of the installation but I cant enter an administrative email.


This thread was automatically locked due to age.
Parents
  • 0
    cbarone,

    make sure that you use different network addresses
    on all interfaces, otherwise you will run into
    spoofing protection.

    If you choose German keyboard layout you'd get "@"
    by pressing "right-ALT + q", y and z are mixed up.

    Once installed you can change the layout with
    "loadkeys /usr/share/us.kmap". To make it persistant
    change the value for KBD in "/etc/console".

    Regards
    ollion
Reply
  • 0
    cbarone,

    make sure that you use different network addresses
    on all interfaces, otherwise you will run into
    spoofing protection.

    If you choose German keyboard layout you'd get "@"
    by pressing "right-ALT + q", y and z are mixed up.

    Once installed you can change the layout with
    "loadkeys /usr/share/us.kmap". To make it persistant
    change the value for KBD in "/etc/console".

    Regards
    ollion
Children
Unfiltered HTML