Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 2 subscribers
  • Views 1152 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Post-install Login

GlobalOrange
Hi,

After installing Astaro, I cannot login to my combined gateway/firewall. I am now using the Mandrake firewall, but would really like to try Astaro.

My setup is as follows:

"server" which should be gateway and firewall, connected to Cable and internal LAN.

2 clients connected to the server.

How should I set this up? Astaro won't accept 192.168.0.1 for both gateway and local IP  [:(] 

Any help greatly appreciated!!
  [:S]


This thread was automatically locked due to age.
Parents
  • 0
    I can't understand your problem... %-)
  • 0 in reply to Chris2
    Problem is, I thought I had the network set up correctly, but could not log into the Astaro web interface.

    Basically, the question is this:
    I have one server and two clients. The server is connected to the internet (UTP) and the two clients (different NIC, using coax).
    Could someone tell me which settings to use for the server and clients, preferably with local net 192.168.0.x?

    Thanks
    Mark
Reply
  • 0 in reply to Chris2
    Problem is, I thought I had the network set up correctly, but could not log into the Astaro web interface.

    Basically, the question is this:
    I have one server and two clients. The server is connected to the internet (UTP) and the two clients (different NIC, using coax).
    Could someone tell me which settings to use for the server and clients, preferably with local net 192.168.0.x?

    Thanks
    Mark
Children