This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setup Questions / Cisco Router

I am now attempting to set this up at work. Here are the configs:
Router IP: 63.142.95.154

(This is a Cisco 1720 Managed Router, I can not make any changes to the config)

Public IP: 63.143.187.124
Subnet: 255.255.255.248
Default Gateway: 63.143.187.121

Internal Network: 10.0.1.0
Subnet: 255.255.255.0
Default Gateway: 10.0.1.1

Important! My client workstations have the following settings for internet access:

IP address: 10.0.1.x
subnet: 255.255.255.0
Default Gateway: 10.0.1.1

I do not want to change any client configurations at all. How should I setup the nics so I do not have to reconfigure the client computers?

Thanks for your help in advance.

--------------------

Chris Barone

This thread was automatically locked due to age.

Parents

0 ollion over 23 years ago

Chris,

your description is not quite clear, your router's
public address is in a different network.
So I assume it is the router's external address.

quote:
Public IP: 63.143.187.124
Subnet: 255.255.255.248
Default Gateway: 63.143.187.121

Is this your firewall configuration and 63.143.187.121
is the internal address of your router?

If yes, configure the internal firewall address
to 10.0.1.1

Regards
ollion
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 ollion over 23 years ago

Chris,

your description is not quite clear, your router's
public address is in a different network.
So I assume it is the router's external address.

quote:
Public IP: 63.143.187.124
Subnet: 255.255.255.248
Default Gateway: 63.143.187.121

Is this your firewall configuration and 63.143.187.121
is the internal address of your router?

If yes, configure the internal firewall address
to 10.0.1.1

Regards
ollion
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data