Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 575 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setup Questions / Cisco Router

cbarone
I am now attempting to set this up at work. Here are the configs:
Router IP: 63.142.95.154 

(This is a Cisco 1720 Managed Router, I can not make any changes to the config)

Public IP: 63.143.187.124
Subnet: 255.255.255.248
Default Gateway: 63.143.187.121

Internal Network: 10.0.1.0
Subnet: 255.255.255.0
Default Gateway: 10.0.1.1

Important! My client workstations have the following settings for internet access:

IP address: 10.0.1.x
subnet: 255.255.255.0
Default Gateway: 10.0.1.1

I do not want to change any client configurations at all. How should I setup the nics so I do not have to reconfigure the client computers? 

Thanks for your help in advance.

--------------------

Chris Barone


This thread was automatically locked due to age.
  • 0
    Chris,

    your description is not quite clear, your router's
    public address is in a different network.
    So I assume it is the router's external address.

     
    quote:
     Public IP: 63.143.187.124
    Subnet: 255.255.255.248
    Default Gateway: 63.143.187.121

     


    Is this your firewall configuration and 63.143.187.121
    is the internal address of your router?

    If yes, configure the internal firewall address
    to 10.0.1.1

    Regards
    ollion
Unfiltered HTML