Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 968 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Reboot Failure

Terry
I have tried three different hard drives thus far. When I reboot after what appears to be a clean install I get nothing but 1's and 0's accross the screen. Can't login to  ADMIN via a browser. Config the NIC with 10.3.1.1 255.255.0.0 (yes this is valid I am CCNA) Have nothing else running on my LAN but one win2k and a Redhat 5.1 
NEVERMIND.....while working on this tried fourth hard drive....noting now that anything at 15 gb is bad but 9 works fine all same brand MAXTOR  go figure.


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to tom_01
    Some thing to try - the Ver2.0 install does not set an active partition. Some Bioses require this. Use a linux rescue disk and fdisk the drive and set the first partition to bootable. 
    For more info see "after install ASL 2.0 / "no active primary partion"" message thread.
Unfiltered HTML