Hardware, Installation, Up2Date, Licensing Problems trying to reimage ASG625

UTM Firewall requires membership for participation - click to join

Thread Info

State Not Answered
Locked Locked
Replies 5 replies
Subscribers 6 subscribers
Views 15003 views
Users 0 members are here

Options

Suggested

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problems trying to reimage ASG625

MarkBell over 9 years ago

Having horrible issues trying to install any version of SSi onto a ASG625 r2.

Several different failures

Most of the time I get a message saying installer cannot find appliance hardware and it dumps to the reboot screen

other times i hit OK and it continues to format disk and seems like its installing but at reboot i get a flashing cursor.

I have tried several DVD's and versions I am at a loss

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 9 years ago

It's possible that files are getting corrupted during burning. 1) Check the MD5 of the ISO after download to ensure it's been downloaded properly. When burning, try with a lower speed. For CD generally recommended at 8x, DVD, I'd try 4x.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Scott_Klassen over 9 years ago

It's possible that files are getting corrupted during burning. 1) Check the MD5 of the ISO after download to ensure it's been downloaded properly. When burning, try with a lower speed. For CD generally recommended at 8x, DVD, I'd try 4x.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 MarkBell over 9 years ago in reply to Scott_Klassen

I am able to install all versions of 8 on this hardware but every version of 9 fails to boot

MD5 checks out fine burned V9.35 on DVD this morning at 4X istall went fine told me to remove media and reboot.
At reboot i see Grub load and it then stops at

Booting Sophos UTM9.4 _3.12.40.26.gc80f187.rbl-smp_ Root _hd0,0_ Filesystem tye is ext2fs, partition type 0x83 Kernel /boot/vmlinuz-3.12.40.26.gc80f187.rbl.smp root=dev/disk/by-label/root vga=791 rootflags=data=ordered spash=silent _Linux-initrd @ 0x37bee000, 0x4015e1 bytes_
Cancel
Vote Up 0 Vote Down

Cancel