Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 2936 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Standby UTM's for internet at different sites?

Louis-M

Just wondering what combinations we can have here.

We have 2 sites, each with 2x SG330 (active/standby)
The sites are connected via a 100mb dedicated link. We can specify our own ip's at each end ie sub interfaces/vlans

Each site has a 50mb link to the internet.

So I'm wondering what combination we could use here eg if internet fails at site A, send all to site B etc?



This thread was automatically locked due to age.
Parents
  • 0

    On each side of the dedicated link:

    • Give the dedicated-link Interface the IP of the other side as default gateway.
    • Leave the Interface in 'Active' in Uplink Balancing.
    • Activate, in order, two Multipath rules with persistence by-interface
      1. Bind 'Any -> Any -> {LANs at other site}' to the dedicated-link Interface.
      2. Bind 'Any -> Any -> Any' to the External Interface.

    Easy Peasy.

    Extra credit for you, Louis, for posting here a method that provides failover for reaching the other site if the dedicated link goes down. [;)]

    Cheers - Bob

Reply
  • 0

    On each side of the dedicated link:

    • Give the dedicated-link Interface the IP of the other side as default gateway.
    • Leave the Interface in 'Active' in Uplink Balancing.
    • Activate, in order, two Multipath rules with persistence by-interface
      1. Bind 'Any -> Any -> {LANs at other site}' to the dedicated-link Interface.
      2. Bind 'Any -> Any -> Any' to the External Interface.

    Easy Peasy.

    Extra credit for you, Louis, for posting here a method that provides failover for reaching the other site if the dedicated link goes down. [;)]

    Cheers - Bob

Children
No Data