Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 7315 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Best practice web filtering

stegman

I have setup webfiltering for my children based on DHCP reservations.

Currently i have to manual add them to the group that is being used in the webfiltering policy so i want to use the DHCP range for easier use.

I want to create a wifi network on the AP55 access point  that uses a new DHCP range and use the DHCP range for the webfiltering but cannot figure out how to 
set that up.



This thread was automatically locked due to age.
Parents
  • 0

    Hi, 

    You can configure a separate SSID for children say, Child. Define it on a separate interface. PFA screenshot:

    Go to interface & routing > Interface> New interface, create a new Ethernet interface and select wlan0 as the hardware definition.

    Remember to configure a DHCP on this interface. Now, you have an SSID on a separate zone with a defined network address. Add wlan0 (network) in the allowed network box of Web Protection global setting. Finally, create a filter profile for child network to filter the web traffic as per the requirement.

    Thanks

Reply
  • 0

    Hi, 

    You can configure a separate SSID for children say, Child. Define it on a separate interface. PFA screenshot:

    Go to interface & routing > Interface> New interface, create a new Ethernet interface and select wlan0 as the hardware definition.

    Remember to configure a DHCP on this interface. Now, you have an SSID on a separate zone with a defined network address. Add wlan0 (network) in the allowed network box of Web Protection global setting. Finally, create a filter profile for child network to filter the web traffic as per the requirement.

    Thanks

Children