This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Throughput ?

I have,

AMD 6100, 6 Core 3.3Ghz
8Gb Ram
2x1 Gig nic's "w/ cat6 STP" "Wan speed is slow..."
5400 RPM drive
all ran in vSphere

What is the throughput on this, is it good or shall i change any think ?


This thread was automatically locked due to age.
Parents
  • Or use te windows 2012 as a dns server for the internal network. True or you could offload them onto separate boxes. Because the more you stress on one system the more bottleneck you may experience.
  • Hi,
    six cpus is an over kill, 2 is more than adequate and for home use 4gb of ram is plenty.
    If you are using the intel drivers the throughput should be good, as around the 50mb/s mark, but that will depend on what else is using the nic. 

    There others with high speed external interfaces that can give a better indication of performance.

    Ian
  • Hi,
    six cpus is an over kill, 2 is more than adequate and for home use 4gb of ram is plenty.
    If you are using the intel drivers the throughput should be good, as around the 50mb/s mark, but that will depend on what else is using the nic. 

    There others with high speed external interfaces that can give a better indication of performance.

    Ian


    Thanks for the info [;)]
Reply
  • Hi,
    six cpus is an over kill, 2 is more than adequate and for home use 4gb of ram is plenty.
    If you are using the intel drivers the throughput should be good, as around the 50mb/s mark, but that will depend on what else is using the nic. 

    There others with high speed external interfaces that can give a better indication of performance.

    Ian


    Thanks for the info [;)]
Children
No Data