This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Strange v8 anomolies

Im new to this product (as i said before in previous topics) and ive been having a very rough experience so far. however some new things popped up and i figured that i would ask around. some of the odd things that happened was that astaro re-designated a new ip/interface for management. the second thing was that i cannot get my second (quad interface) nic to access the internet while the native dual nic config on the motherboard can easily go out to the internet.


This thread was automatically locked due to age.
Parents
  • Rogue, it's hard to tell what you're asking, so I'll make some WAGs...

    Unless you activate Uplink Balancing, you only can have a single interface with a default gateway.  You will have problems if you have two physical interfaces connected to a single, physical Ethernet network.  If you add NICs after installing the hardware, they only will work if they can use the same driver used by the NICs present at installtion (Astaro is not plug-n-play).  NICs that do work because they use the same driver may cause the interfaces to be re-numbered.

    Did I just pitch four balls, or was there a strike in there? [;)]

    Cheers - Bob
Reply
  • Rogue, it's hard to tell what you're asking, so I'll make some WAGs...

    Unless you activate Uplink Balancing, you only can have a single interface with a default gateway.  You will have problems if you have two physical interfaces connected to a single, physical Ethernet network.  If you add NICs after installing the hardware, they only will work if they can use the same driver used by the NICs present at installtion (Astaro is not plug-n-play).  NICs that do work because they use the same driver may cause the interfaces to be re-numbered.

    Did I just pitch four balls, or was there a strike in there? [;)]

    Cheers - Bob
Children
No Data