This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wan link error

I'm having a problem with my ASG v8.103 where every few days my WAN link (cable modem) shows it's status as being up, but the state as up but the status as error and I have no internet connection. Unfortunately when this happens the only way to correct it is to turn the interface off and back on again. Is there something I can do to prevent this from happening or to have it automatically recover itself from this situation?

This thread was automatically locked due to age.

Parents

0 da_merlin over 13 years ago

Can you do the same please on the ASG console?
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 da_merlin over 13 years ago

Can you do the same please on the ASG console?
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 creativity over 13 years ago in reply to da_merlin

Can you do the same please on the ASG console?

Yes, of course
you mean Ping Check?


Ping Check Result

	

	



PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.



64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=5.16 ms



64 bytes from 192.168.1.2: icmp_seq=2 ttl=64 time=7.98 ms



64 bytes from 192.168.1.2: icmp_seq=3 ttl=64 time=6.30 ms



64 bytes from 192.168.1.2: icmp_seq=4 ttl=64 time=4.53 ms



64 bytes from 192.168.1.2: icmp_seq=5 ttl=64 time=4.13 ms







--- 192.168.1.2 ping statistics ---



5 packets transmitted, 5 received, 0% packet loss, time 4005ms



rtt min/avg/max/mdev = 4.137/5.626/7.988/1.392 ms