Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 60 replies
  • Subscribers 3 subscribers
  • Views 107850 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wan link error

digitalfx
I'm having a problem with my ASG v8.103 where every few days my WAN link (cable modem) shows it's status as being up, but the state as up but the status as error and I have no internet connection.  Unfortunately when this happens the only way to correct it is to turn the interface off and back on again.  Is there something I can do to prevent this from happening or to have it automatically recover itself from this situation?


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to da_merlin
    Seems your AP is not forwarding the packets.

    Can you verify that 192.168.1.2 is reachable and forwards
    packets to the internet?


    mm, i have  access to the internet via AP
    and ping 

    	

    

    PING google.com (74.125.39.147) 56(84) bytes of data.

    

    64 bytes from fx-in-f147.1e100.net (74.125.39.147): icmp_seq=1 ttl=46 time=97.2 ms

    

    64 bytes from fx-in-f147.1e100.net (74.125.39.147): icmp_seq=2 ttl=46 time=96.9 ms

    

    64 bytes from fx-in-f147.1e100.net (74.125.39.147): icmp_seq=3 ttl=46 time=97.4 ms

    

    64 bytes from fx-in-f147.1e100.net (74.125.39.147): icmp_seq=4 ttl=46 time=95.4 ms

    

    64 bytes from fx-in-f147.1e100.net (74.125.39.147): icmp_seq=5 ttl=46 time=105 ms

    

    

    

    --- google.com ping statistics ---

    

    5 packets transmitted, 5 received, 0% packet loss, time 4005ms

    

    rtt min/avg/max/mdev = 95.459/98.535/105.604/3.613 ms


    or I do not understand the true test ?