Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 3 subscribers
  • Views 7494 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Link Aggregation

daniell
Hi.. Anybody who can help me with this setup !!..

I have a running server with 2gb bounded nic's to 192.168.0.10
and in my Astaro box i have internal 4 gb nic's. 
1.st  --> WAN
2.nd  --> Switch with DHCP 192.168.0.1-255/24
3.rd and 4,th is planed for the server as Linked Aggregation..

any recipe for this setup ??
Thnks


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to BarryG
    Thank's BarryG

    I finely fount a solution for this..
    I downloaded the ASG 8.001 version, and  installed ok..

    In my ASG Hardware, it shows:
    eth2 [Intel Corporation 82571EB Gigabit Ethernet Controller]
    Auto negotiation: On
    Supported link modes: 10baseT/Full,10baseT/Half,100baseT/Full,100baseT/Half,1000baseT/Full
    MAC Address: 00:15:17[:D]c:1e:5a
    Interrupt (IRQ): 28
    PCI Device ID: 0x105e:0x125e
    MII capable: No
    HA link monitoring: Yes

    But on the box, it says : 
    Fujitsu
    Eth Ctrl 2x1Gbit PCIe Pro/1000PT Cu lp
    Prod-no :S26361-F3228-L201

    I guess it's the same as : Intel® PRO/1000 PT Dual Port Server Adapter - Overview

    I belive it's not correct driver loaded !!