Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 3 subscribers
  • Views 614 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[ASG v7.303] Clustering ERROR log...

1771k3
Currently both ASG was using v7.303.
I configured the first unit meanwhile I saw the high-availability live log and everything was fine, no error message.
The status changed to be MASTER.
Then I configured the second unit, I choose automatic configuration option.
After the second unit joined as SLAVE... the ERROR log comes up every 10s.
I'm waiting for several minutes but nothing happened.
Is this because of the firmware?? Because I found in this article
"www.astaro.org/.../22273-7-250-webadmin-shows-ha_system_unstable-confirmed.html"
Please help me...


This thread was automatically locked due to age.
high-availability-2008-10-24.zip
Parents
  • 0
    When you first install a cluster, you should NOT configure the Slave.  Just load it from the CD, turn it off, plug in the ethernet cables and turn it on.  The Master will configure it.

    According to several recent posts, the V7.302 software appliance ISO seems to not work well for some installations.  If you loaded from it, I suggest that you start over with both units beginning with the V7.300 ISO and applying the Up2Dates from there.  Of course, you can backup your configuration from the Master and apply it after you go through the reinstall.

    Cheers - Bob
  • 0 in reply to BAlfson
    Thank you Bob for quick response...
    Both unit using ASG 525.
    Right now I already have the ISO (v7.302) for hardware appliance which I got from ftp://ftp.astaro.com
    Could I use this ISO to flush both of the unit? Is that okay?
  • 0 in reply to 1771k3
    If I'm using ISO hardware appliance which downloaded from ftp site.
    Could I use this ISO for any types of ASG?
    Please help me...
  • 0 in reply to 1771k3
    hi,

    i think, the iso-files ftp://ftp.astaro.com/pub/Astaro_Security_Gateway/v7/hardware_appliance/iso/ are quite ok, i ´ve  downloaded it and have re-imaged my Cluster slave with it. Works fine.
    But, as Balfson already mentioned, you should install the updates to 7.303 and 7.304 after re-imaging. 

    Here in the forum, you´ll find some "cookbooks" how to update an cluster


    Cu
    Thomas
Reply Children